Search results for query: *

Dam, u do awesome work John. Thanks for sharing your expertise with us. U do us proud. Kim

Easiest way to wipe a cam if it’s a flat tappet. U may have to grind on the starter or bell to get it to fit square to the bell. This is very rare. Most likely like stated above u didn’t have it in place right. Kim

So would I. U can still run the solid rollers on the hydro shaft just use less lash like said earlier. Kim

We never had problems like this in the old days. Kim

The Sonax valves may not have been installed properly or were defective. Show us some pics and the instructions. I assume u changed the manual valve and what else? Kim

Yes, it surely will be extra. Kim

U need to replace the cooler in the rad. They plug up pretty good. A radiator shop can do that easily. Or find another known good radiator. Or use the rad which u have already have. General Motors has a flush in a spray can that they have approved for their cooler flushes. I believe u use 2 or...

The forward clutch is applied in all forward gears. The direct clutch is applied in high gear and reverse gear. Kim

The lower hose is on an angle for the 6s and may possibly take a smaller hose. U may be able to work around that. Kim

I think that dealer is full of crap. They are probably thinking that u want them to do it so they Jack the price up so u say no thanks. Kim

Welcome to FABO. Sorry for your loss. Good luck on your build. There are many great members here to help u out. Kim

Nada

What’s your budget?

Yes, sorta kinda. I had to drill 2 holes on each side. I believe thru the body sheet metal. Once u look on your car u will see what I mean. Then they bolted on the same as the 71. I did this in 1998 so I can’t quite remember. My car is in storage so I can’t look at it. But it was simple to do. Kim

Sweet. Can u give us a break down of the cost of parts and labour? Thanks. Kim

Which way does it rotate from looking from your pic ?Cw or ccw?

74 duster with 71 valiant bumper. Used the 71 brackets. Kim

Welcome to FABO. The best Mopar Site on the planet. Nice car? Kim

Show us some pics of both together.

Sweet. I like the Daytona’s best. But I do like them all. Thanks for sharing Rick. Kim

I’ll have that. Message me on thesday, I’ll be home then. Kim

I stand corrected. @Johnny Mac

Would u ship me 2 to Canada. S0L 1S2. Thanks. Kim

What rpm r u running it at? I usually do 3G but I had the same problem on 1 motor so I slowed it down to 2g and she was a lot better. What r ur ring end gaps? Kim

With the rubber insert?

What is the compression distance?

Chris I think this guy can help u. @Max1196

Are these forged?

Thanks, I’m good for rods at the moment.

Sorry, I don’t have a pic. This was years ago. I believe it’s where I said it is in post 20.