Search results for query: *

The first time I saw a Mirado at the dealership with a 360 and Thermoquad I wanted it so bad. Just didn’t have the money. Still had my 1970 Dart then so it wasn’t so bad.

Missing motor from my 1970 Dart Swinger

Actually I’m looking for OR141151

I pulled my 360 out of a 1971 C body Chrysler. It had J heads. Block was made in May 1970 as I recall. Don’t remember the intake or carb as I didn’t intend to use it.

Str12-340 suggested I make a punch list to mark off as I get things done. I took his advice and reviewed it lately. I was pleased to see quite a few items have gotten done though slowly. Thanks str12-340. One item I’m pleased with is the finished heads were flow checked on one intake port by a...

That’s a right on for updated rockers. My daughter in law put a pushrod through one of hers. I put heavy duty rockers from Mancini on her stock la engine in her tow truck but you’re camming yours up.

Thanks for the input. I did my heads yesterday and the Howard’s worked fine. Sneaked up on the measurement I needed on the first one, set a depth stop for my drill off that one and the other fifteen were done in minutes. Used CRC on one head, nothing on the other. Couldn’t tell any difference...

Not much to update but some slow progress. Got the valve job with a 70 degree throat cut and one head blended into the bowl. Gasket matched with radius of the pushrod pinch to the straight port wall. Still more work to do around the guide bosses and clean up the chambers a bit more. Guide cutter...

Oops, I actually ordered .530 seals. I went back and edited my post. Thanks. I didn’t see any .531 seals at Summit so I thought.001 would make them tighter and not particularly hard to install. Any experience with that? I went with the Howard cutter because the mandrel came with it.

Thanks anyway guys; I just ordered the Howards .531 cutter and Manley .530 Viton seals. Feel free to speak up if you don’t like these or the combination.

I got my valve job done and did some measurements today. I’m going to have to cut the guides down to make proper clearance between keepers and seal. I want to do it myself rather than take it back to the machine shop. I know there are cutter’s available from cam companies and from Goodson. Is...

I had some 2.02 valves put in a J head years ago. Same casting? Yes, but my machinist didn’t do the work the X head came with. I’m taking my J heads I’ve been reworking after reading and watching DV to get a proper throat cut. Here are three pictures; two of the stock X head and J with the half...

Comp Cams has a valve timing tutorial available with a diagram I printed off to help me figure out valve timing events. You can take the duration (total) and the installed angle to get the ABDC closing. It will be the installed angle plus one-half the duration minus 180. For example with my cam...

I’m finishing my 360 as is that was already honed without a plate. For my next build which is a 340, I’m going to use either the shops on Columbus, Ohio or the shop in Dandridge TN a member on here told me about, with plate.

I can appreciate that. I could get more done after work that I can now with all day to do it. But the good part is, I’m getting to do the things I want to do instead of what I have to do.

Yeah, wish I could spend more time in my shop. Backs out right now from digging out and clearing the septic tank line down at the church; but I can still manage to get a bare block into the back of my truck. I just do a little at a time.

Heard that! I took my sons, their family and friends out for tacos and told them just put what they wanted on my tab. There went a torque plate sized bill. LOL

I hope you’re being sarcastic?

I looked online. Seems they are over $300 today.

No sorry; I meant did you do honing for others or if the plate was for your personal use only.

I appreciate the info Pittsburg. That’s good to know.

No, it will not be a race engine at all; just street and occasional strip. Into the 12s will be great for me. The current 360 build I’m finishing has piston clearances all over the place from .00175 to as much as .00425 after honing rust out of it. That’s not the build I wanted a torque plate...

I remember Ed Hamburger. Yeah, good to have had those. Do you do for others?

Thanks JD. That’s right in my stomping ground.

Unfortunately, Bo Beverly passed away about a month ago. Another racing legend gone. When I called before; he was in the hospital and today I found he was gone. I missed the chance to make that visit. Some speculation his son may carry on the business but the phone is discontinued at present.

I see I am not alone in this marriage thing. But;… I’m just glad she would have me.

I have to make my wife comfortable or ride alone. Next guy can put the bench back in if he wants to. It’s not like back in the day when she rode in the middle. We’re married 51 years now.

Might do me some good down the road if I put the bench back in but I’m planning to try some six way power, heated and cooled buckets out a a Nissan Maxima. I accept all chastisement for such blasphemy.

Thanks! I could not imagine what it might be.

It’s been a while since I gave an update. Things went slow over the winter for lack of shop time. I spent about a month just getting a Harbor Freight blasting cabinet together with its million screws. It works good when I switched from walnut shells to sand. Still need to add more light. After...