Search results for query: *

I have two clutch issues. Once you accelerate over 2500+ rpm the pedal loses it free play and gets harder to push down when shifting then at about 4000-5000 rpm when the motor starts making some horsepower the clutch starts slipping. The strange thing is that the old clutch also slipped like...

Heck... on a farm in the country.... Mom used to have to holler for us to get back to the house when it got dark

Welcome from Alberta, how about showing us some pictures of your Dart?

. You'll shoot your eye out

Sounds good, FWIW I’ve seen references to normal running temps for these alternators running in the 180-230 degree range.

It’s a nice unit for sure.

Any thoughts or ideas on installing a grease nipple to lube the ball and trunion?.Any and all thoughts would be appreciated.

Looks like the 68 and up slides rather than swivels like the 67, who knew!

My mistake I have one of each, my 03 CVO Deuce has the tensioners..

I fought getting the fuel pump to run most of the day but finally found a bad ground. Once that was fixed, I got it to start. Runs for about 4-5 seconds then stalls, but at least starts. I'm sure it's a timing issue. Battery died so I decided to put it on the charger and give it another shot...

Doe anyone know what props Mopar Tim used I am not sure I found his post

I have a set of motor mounts I have no idea what they came off of. If you know please post what they fit $50.00 obo plus shipping from Fieldale va 24089

Thank you. I used my 2 driveshaft safety loops as somewhat of a gauge to get the shape.

All from '65 Barracuda Formula S. A904 transmission $175 Torque Converter $50 Flex Plate with bolts $50 Torque convertor inspection cover and plate $50 Park Cable with casting $50 Dipstick and tube $40 A904 was working when removed, in storage since 1998. Torque converter has slight seal...

I have 5 Plymouth division dog dish caps they all need a good cleaning and all have damage of some sort. $125.00 plus shipping from Fieldale va 24089

70's 4 bbl air cleaner in good shape comes with a brand new air filter $150.00 plus shipping

I'll will search tomorrow night. In bed now.

Rollmaster!

Here's a set of factory valve covers from a 4x4 dodge truck $40.00 plus shipping

Awesome lol! I had to replace one headlight in cuda, so figured I may as well change both, even tho other one worked. Pulled them both and the orig owner had labeled the working one with a type of fabric tape with the date lol. From the 80's...unbelievable. Nowadays parts look great and don't...

If you can’t find any here, Dr. Diff sells them.

15x8.5 small bolt pattern 5x4 Backspacing 4 7/8

Looking like Larson may not make the start of the race so change him out for Reddick

Killed that

2 - 2. Over/ Under is 5.5. . I'm thinkin the over

Hopefully second is as good as first period

.468. 224/[email protected], SFT. Low compression ‘73 340, stock bore, 273 rockers, stock heads/manifolds, LD340 intake. I would like to optimize the iron heads and use a different piston and head gasket. It’s my cruiser so I don’t want to tear it down yet.