Iam going to be doing body & paint on a 73 340 duster. He is fixing it up for his son. I will be doing it all original color, stripes ect. but his son likes the loooks of the 71 duster black out hood treatment with the 340 wedge hood decal. So iam going to do that for him. Does anyone have...
When it comes to the A body small block 10 1/2 clutch & bell housing how many different fork pivots were used ? Im having a hard time clipping the clutch fork on to the throw out bearing. When i take the pivot off it clips right on.
When bought my 360 i didnt notice that someone had broken the lower tip off of the oil dip stick. Its broken off flush to the block. Anyone have any ideas how to get it out ? Thanks
If you are thinking of recoating it with more clear dont go any finer than 800 grit. If your going to wet sand & buff i would start with 1500 grit then 2000. If there is 4 coats of clear you will be fine. My normal is 3 coats of DA sand it with 1500 then buff it.
I finally got some things done on my 67 barracuda. I got the engine & trans in the radiator, right header, shifter mech. & linkage. The left header, Z bar, starter, clutch fork & every thing else that goes with the trany is next.
When it comes to the Z bar has anyone modified the Z bar them selves if its just the matter of cutting & welding i can do it myself it would be cheaper
I bought a pair of long tube TTI headers at Carlisle last year & im finally getting around to put them in. I dont have much experiance with them. My car is a 67 barracuda with a 360 & power steering. What is the best way to install them ? From the bottom, top, do i need to loosen the...
Does anyone have pics of there power steering pump ? I need to find out what for brackets are missing on mine if any. My barracuda came with a 273. thanks
my dad had a 67 GTX 440 4spd & the crank he had bought wasnt drilled so he used that same bearing not sure if that was the reason but that was the easiest trany install i ever did by my self
when i bought this engine (360) it already had a pilot bushing in it so i never gave it a thought that the trany wouldnt fit also the alignment tool i got with the clutch kit fit ill have to check it out thanks guys
Ive put in a few 4spd tranys before with help $ by my self. They all went in without any major problems. Saturday afternoon i decided to put my 4spd trany in my barracuda. I got it in the splines with out a hitch but thats all the further i could get it to go. The trany is about an 1/4 inch...