Search results for query: *

I checked both bars, they’re 892/893. I don’t keep the smaller bars, simply because I don’t need them. I’ll get em finish packed and send over my PayPal ID if you do PayPal.

Here you go. I think “ground advantage” is the old parcel post, which is 6-10 days, where Priority Mail is 2-3 days. That’s from Michigan to North Dakota, although I would assume any middle states would be roughly in that ball park. California would probably be double that. For reference, the...

I need your zip for a shipping quote please.

I’ll drip mine in a tube and run a quote through the PO and let you know what shipping from Michigan would be.

Follow through with Dana on this, but if it falls through, I have a couple sets of 892/893 bars, and I’ll sell em for $50 plus shipping if the deal falls through with Dana. For reference to Dana, I send bars in carpet tubes, 2 fit nice with a little padding, and don’t move around. My local...

I have 2 complete sets thst I’ll drag out and picture for you on Saturday, I won’t be able to get to them until then. You can take your choice of either set.

No. The 10x1 3/4” small bolt pattern backing plates are exclusively unique to the A body 8 3/4” axle only. They have a unique offset for the small bolt axles and will not work with any other axle, nor will any other backing plates work with them. However, you can make the 7 1/4” 10” backing...

There is no such piece that does the job you describe. On the lower hinge in your pic is the only hinge control on these cars, the double wheel and bar that holds the door open. I thought you were referring to the wedges on the door jamb side that align the convertible doors when closed.

I’m inheriting 9 different 8 3/4” rear ends this weekend in a clean out of a friends Mopar stuff. I’m in Michigan also, near Ann Arbor. I don’t want to walk in Sinisters offer tho, so follow through with him. You can message me if that doesn’t work out.

This is a Valiant bezel on my 66 Cuda. The inner lip is not a deep as a Barracuda bezel, and it has a slight scallop on that side because the bezel is meant to sit flat on the Valiant grille, and the scallop matches up to one of the fins. I have a couple of undented Barracuda bezels, but the...

If you’re looking for a Fury, this one can be had in Michigan, close to the Ohio border.

The big question is….what axles do you have? If they are the original small bolt pattern axles, the ONLY brake setup that will fit are the 10”x 1 3/4” set that Superbee6 has. To be able to use ANY OTHER brake setup will require aftermarket axles with the large bolt pattern. The A body small bolt...

Did someone hook ihop with a set of brackets, or do I need to dig out a set for the boy?

65 brackets will not work on a 66, the bumpers are totally different!

They repop them.

The early A body cars like the 66 he is working on actually have both sill plates as well as carpet hold downs. So, question to the OP, which pieces do you need?

Yes they do. All 64-66 Barracudas have the rear window trim pieces and the fold down seat latches and covers. For the OP, there’s an ad up here in the classifieds of a member parting out a 66.

Slant 6 and V8 use 2 different Z bars. And if I’m not mistaken, yours will also need to come from a 66 or older car. @SSVDP do you have a slant 6 or V8 one you could post a picture of? I have a few here to compare to if you have a confirmed /6 or V8 unit.

And exhaust manifolds!

What do you consider small hubcaps? The 9” dog dish fit any number of different rims, including the early 13” and 14” small bolt wheels. I have a few sets of the 14x5.5” small bolt steelies, but I’m in Michigan.

I was offered 5 of those windows for free, just pick them up. I passed, as I already had 3. At one time I saw a 65 sitting out by the road, all clapped out and just out of the barn. I asked how much…$4500. I asked him why so much and he answered that the back window alone was worth $1500. So I...

Ok gang, I have a deal working with a member to swap parts for parts for what we both need. Thanks for all the replies, I really appreciate it.

Howdy people, I’m working on a members car, and there are a few parts missing from the car. Namely in this thread, the hood latch bale loop that mounts to the hood and engages the latch mechanism when closed. I believe it is also missing the secondary safety latch as well, so I am looking for...

As do I.

The stainless trim quarter spears are a 64/65 item, the 66 cars used an aluminum spear. That said, if you open up the end of the spear where it slides over the tang of the taillight housing, you can use the stainless spear, although the profile is slightly different. Most folks prefer the...

I have one in Michigan, but I’m not going to Carlisle. I’ll check around to see if anybody I know is going. $50, and it’s good and solid, no cuts or rust through, just a little surface rust.

I cut him out a piece already and have it boxed up to ship, just waiting to hear back from him. The dash I used was rotten along the bottom.

Messaged you through your email link.

Then you would know that those are the only ones he can use, due to the unique A body only axle offset. And he can only use the 1 3/4” brake shoes, also an A body only width, Fury would be at least 2”, probably more like 2 1/2”

67 cars did not have any trim on the windows, it was just a plastic insert that went into the rubber channel thst had a chrome ribbon on it. 68/69 cars had the stainless trim, but to use it you will need to change the rubber gaskets, and add the clips.