Search results for query: *

Anyone using a Turbo Action Cheetah shifter with a forward pattern and using air to have it shift? Does it shift the 1-2 and 2-3 shifts? Can you post a picture of your setup. Thanks.

When I bought my 1969 Plymouth Barracuda it had been updated to electronic ignition. It has a bracket that mounted to the wiper motor studs to mount the ignition box. After redoing the car I mounted the box in a different location and no longer need the bracket. Is this bracket a...

Parts were removed from a 1969 Plymouth Barracuda /6 225. 4 blade fan - $10 Water pump pulley - $20 Starter shield - $5 Kickdown/throttle rod - $5 Not sure if these items were removed from the the 69 cuda or not, but where in the same box of parts. Bracket/clamps #1-#3 - $2 each Hose supports...

2 used Toyo 26x4.5-15 front drag tires. Were used for a handful of years and removed from the car around 2013/2014 as I went to a different size tire. Have been stored indoors since. Are dirty/dusty from storage. Would be good for mock up or for show car, can't say I'd personally use them on...

1. New Leupold 170385 Base For Savage 10/110 2-Piece Style Black Matte Finish Top Mount - $7 2. Used Grayling Fletching jig Crossbow Archery 3 and 4 fletch Straight Clamp GOP-160 - $40 3. Used broadhead lot vintage bow hunting archery deer field points 3 4 blade - SOLD 4. Used Simmons 3-9x40...

1. Used Craftsman No 9 3257 7" Thin Rim Satin 3214 saw blades 32424 8" Lot Dado set - $17 2. Used Accurate Instruments Co Dwell Angle and Tachometer Model BT-163 - $12 3. Used cabinet hinges lot kitchen bath hardware door - $1 4. NEW 8" drawer slides 2 pack with screws Black - $4 5. NEW 20 oz...

Used Leupold Rifleman 3-9x40 scope. Has a few light ring marks and a mark at the end of the scope as seen in picture. Asking $200 + shipping.

2 Used Skid shoes. They are design to fit a Western 49067 RP413608/49067. I bought these 2 years ago and made brackets for them to fit on my John Deere Frontier 6' rear blade. I used them twice this past winter, but no longer need them. Brackets are not included, only the skid shoes and...

Used Holley carburetor. Has L7957 and 1019 stamped on it. Was removed from a 1975 Plymouth Duster in the mid 1990s and has been sitting on the shelf in the garage since. I'm sure it will need a rebuild to be used. Asking $30 + shipping.

Bumper jack, I think it is from a 1972 Chrysler Imperial, but not 100% positive on that. It should work for other years make and models as well. Only what is pictured is included. Asking $10 + shipping.

2 carburetor chokes. One has 43 on it, One has 44 on it. These have been sitting on a shelf in my dad's garage for years. They look in pretty good condition, but it appears they were mounted at one point as I can see gasket reside from them being on a carb. Asking $2 + shipping for both.

Misc Brackets. $2 each or $10 for all + shipping.

Used pair of Mickey Thompson 28x4.5x15 ET front drag tires. Were bought new in 2014 and used until 2017 when I went to a smaller tire. Have been stored in my garage under the steps since they were removed. Tires have right around 200 passes on them. Asking $50 for the pair. Buyer must pick...

Used console for a mopar. Not sure what it originally came out of. Has lock but is frozen (Button doesn't push down). Asking $200, buyer can pick up in Keymar, MD or pay shipping cost.

Used wiper motor. Not sure of year or model it originally came off of. Has not been tested, and has been sitting on a shelf in my dad's garage for the last 20+ years. Asking $25 + shipping.

Lot of heater hoses. The only new one that I know of is the one is the box Napa Part # 819-1126. I'm not sure what any of these fit. Asking $2 + shipping for entire lot.

Bumper jack, I think it is from a 1972 Chrysler Imperial, but not 100% positive on that. It should work for other years make and models as well. Only what is pictured is included. Asking $20 + shipping.

Used intake valley heat shield for a big block Mopar. I'm not sure what it originally came off of. Asking $5 + shipping.

Used Kickdown and Torque Shaft linkage removed from a 1971 Plymouth Fury. Car had a 360 with a 727 transmission and was a column shift car. It may fit other years/make/models but I'm not sure. Asking $40 + shipping.

I have 2 thermoquads that have been sitting on a shelf in my dad's garage for many years. I'm sure they probably need rebuilt. 1st carb has markings: 6-2124 11 9078S 03277 12 2nd Carb has markings: 34 6-2363 9140S 34677 Asking $50 each + shipping. Can provide more pictures if needed.

Used transmission cooler. Worked fine when removed, has been sitting on a shelf for the last few years in my garage. Asking $10 + shipping.

$15 + shipping for items on the table. Will sell individual items of interested.

2 used 2B1 headlights. One is Wagner, the other is General Electric. I have no way to test these to see if they work. They have been in my dad's garage for years, so I'm assuming they work, otherwise he'd thrown them away. I have no idea what vehicle they fit. Asking $2 + shipping for both.

Various Gauges, gas pedal, door handle, emergency brake pad cover. fuel/temp gauge. 2 of the emergency brake pads are new in plastic, everything else is USED. Not sure what any of it fits or was removed from as the items have been in my dad's garage for years. Gauges have not been tested as I...

Original 383 intake for a 1968-1969 engine. Will also fit 400 engines. Asking $100 + shipping or can be picked up in Keymar, MD.

I have a 2017 Ram 2500 that has around 23,000 miles on it. The original Firestone tires that came with the truck are about shot. Pretty disappointed that they aren't going to make it much past 25K. Tires are a 285/60R20 size. Truck is mainly used to drive back and forth to work and tow to...

Used Kickdown and Torque Shaft linkage removed from a 1971 Plymouth Fury. Car had a 360 with a 727 transmission and was a column shift car. It may fit other years/make/models but I'm not sure. Asking $60 + shipping.

Used Torque shaft shifter assembly removed from a 1975 Dodge Charger Daytona. Car had a 360 with a 904 transmission and was a column shift car. It may fit other years/make/models but I'm not sure. Asking $25 + shipping.

Original 383 intake for a 1968-1969 engine. Will also fit 400 engines. Asking $125 obo. Buyer can pickup in Keymar MD, or pay for shipping.