Search results for query: *

Thanks, what are you asking for the radio?

Thank you

Looking for an original 1970 Dodge Dart radio. Has the vertical wheels on each side and fits a Ralley dash. Doesn’t have to work, but needs to clean up well and be presentable. Ideal if it lights up with headlights.

Curious if the car sold. My colleague a few miles away reached out to you, he wanted to come and see it. If it's not sold, can he come see the car? Thanks, Steve 207-252-1807

Turbotype1, I understand what you're describing perfectly. As for the wheels, they're probably only rubbing due to the aftermarket calipers you described. Factory KH calipers would have likely set up fine and not caused any contact with the wheel. Since you added spacers so as to allow the...

I'm finishing up my '70 Swinger and I want to attach the chrome trim on the front of each fender extension that surrounds the grille. I have Part numbers: 3574118 and 3574119 which I have verified are the correct pieces needed. The problem is that when I hold them up to test fit them on the...

Quite a bit of rust on the chrome inserts, would you take $80 and I can paypal you?

I don't know Turbo, all I know is my dog won't stop playing with this rock.

Do you have the flip out style seatbelts for the rear seat?

He's referring to the factory installed passenger side dual exhaust bracket.

Looking for some black flip out style seat belts that I only need for my back seat. Can be in decent shape as long as they are restorable with not rust, tears, stains, etc.

'66 Dodge Charger, 426 ci. automatic 1 of 218 '11 Dodge Challenger SRT8 392

Need the rear seat belts (flip cover style) in black.

I need the drivers side engine mount for my 1970 340 Dart. Just the metal bracket, not the rubber insert. thanks, Steve

mopardude318 No worries, your Dart is coming out absolutely killer. I'm building the exact same car right now, getting to the final assembly stages. I'll try to post pics. Steve

Right, but the wiring harness on these cars goes from the bulkhead connector down the drivers side inner fender, these are on the passenger side. There is no blower motor harness, it wires in under the dash.

Sorry, actually there are only two clips.

Looking under the hood of my 70 Dart and other A bodies, I know there are several bendable metal wire looms or clips to hold brake lines wiring, etc. on the firewall. Looking at the blower motor, off to the right of it are about 3-4 other bendable clips that are empty. It's a non a/c car. Is...

My '70 Swinger goes to the top of the pillar with two little chrome trim pieces that finish it off niceley.

rtspecialties.net

Question for all of you gurus. I'm assembling my 70 Dart and am now focusing on the rear of the car. I have my bumper back from the chrome shop, valence panel painted, and rear bumper brackets painted, even cushioned with the proper round white gaskets between bracket and car. Should I...

OK, I give up. How the hell do you attach the decklid to the hinges. There doesn't seem to be any threaded attachment to put the 4 bolts in to. I looked at the manual and they reference 'tapping plates,' but I'm not really sure.

Currently hotrodding a '66 Marlin.

That stripe is perfectly placed.

The secret is you need to pop the bezels off, then run a small, thin piece of metal down the channel. The back side of the seat is where the clip is (as if you were standing behind the chair, the side closest to you). Something like a hacksaw blade, but not an actual hacksaw blade! Try to...

Hello, I'm an hour north of you in york, maine. Do you still have the pump? Thanks, Steve

1966 Hemi Charger 1970 340 Dart

I need the vertical stainless windshield trim.

I had my filler neck media blasted down to bare metal and would like to paint it. Does anyone have any ideas for the best color? Thanks, Steve

Very helpful, guys. Thanks.