Search results for query: *

The m1 with a 1in 4 hole supersucker.The stroker provides excellent torque and the m1 will give good midrange and top end power.

With a full port 894x headed stroker with a 750 hp Holley,step headers,an M1 single plane and a xe275hl cam with a 1.6 roller rocker 9.5 comp.ratio etc. you would be in the 440 hp/490 ft/lb range like the one i built.In a light 3150 lb A body with the right gear like a 3.91 4.10 ratio and a good...

I am using the comp xe275hl cam in my 340/416 stroker and just love this cam.fantastic torque and midrange power.i don't spin it past 6000 rpm's because it is a stroker,and is a street car,it would work great also in a 340 street car up to 6000 rpm's.

Nice looking Barracuda Scott.Look's very clean.

I just purchased a new SFI 6.1 approved Quick time bellhousing.Has any member's used this piece.How is the fit,does it also require centricity to crank with offset dowel pin's or will straight pin's work o.k Going in my 340/416 f/b Barracuda.

That cam would be good to 6000 rpm's.I run a 4150 HP 750 big's prepped carb with my 416/340 stroker,it run's great.

I also have a 340/416 combo with a balanced Scat kit.I am running the 894X head's with S/S valves full port and polish.port matched M1 single plane intake with a supersucker spacer,the XE275HL cam and a Big's prepped HP 750 4150 CARB.This setup has awsome torque,I figure it should make about 445...

Welcome to the site Glen

Looking to install a 6 or 8 point roll bar in my 67 f/b Barracuda.Which would be the best recommended manufacturer,and any pic's would be great!

Nice trailer Scott.Can't wait to see it up close.What are you going to do with the old one!

Right on Scott.Good work!.Car sound's real strong and look's good to.Hoping to get my stroker Barracuda in the mid 11's this coming year.

They would be at least 72cc. I have a pair on my 85 d150 pickup truck.It has a 318 in it,i had the machine shop cut them down 40 thou on the bottom and 25 thou on the intake side and used the M.P thin head gasket.Every thing went together perfect.Work's great.

I just got a new one for my 67 s Barracuda this week from Herb's part's. It's flat,he has three more if you need one.

Arrived at Moparfest Sunday morning,was a great show with desent weather,we found the FABO member parking and met some member's,had a great day.Thank's for the kind word's Bill,love the dart.You as well Scott,love your dart as well.

I'm going and taking my 85 Royal s.e d 150 pick-up.Fully restored.

This is my 85 Royal S.E d150

Pettybludart,i am running the Compcams promagnum chromemoly roller rocker arms for the shaftstyle la head's on my 416 stroker 340. they are a very good rocker for the money.

I have a 85 dodge ram with 596 360 heads i bowl ported and cleaned up the runners,removed 40 thou off the bottom and 25 thou off the intake side on the original 318.I am running an ld340 intake with a 1405 600cfm eddy carb,and a mallory 6 ignition with a xe256h comp cam with mp lifters.The truck...

I have a hurst linelock to install in my 67 cuda this winter ,was wondering if anyone has any pic's of it mounted in the engine bay .

I'm going to if it does'nt rain.

I'll pull the plug's,pull the carb birchwood spacer and check it with a straight edge,and recheck the firing order.It sounds like all the lifter preload is fine as the is no valve train noise.

with the proform mainbody,will it give me more cfm's.

Im running the m1 single plane with a half inch birchwood spacer,i'll pull the plug's in the morning.

Hi guys,I am in the middle of breaking in the 416 stroker in the barracuda today,however i have a slight problem in that the number 4 and 6 exhaust is glowing red in about 4 minutes at 2500 rpm's.I tried advancing the timing and have the same problem,I do have a hydraulic cam with pro-magnum...

Its to bad ill miss another one,putting the 416 in the barracuda that weekend!

Nice shots,wish i could have went!

Posting the pictures of the 85 dodge ram royal s.e that i tried to do on my first post, the resolution had to be adjusted,i think i have it figured out.Now my camera is out of batteries!.Can't win?

As you can see pettybludart,i still cant get the pictures right?

They are usually around 65cc on the 68-69 castings,and flow about 180-190stock,but to be sure spend a few extra bucks and get them cc d They can also get as high as 72cc ,the very.

Thank-you every body for the warm welcome for being a new member of FABO,that was nice. Sorry for the non showing of the pictures, as i had the wrong resollution in size.I hope i have it right this time.As stated the first time the truck has a 318 with 596 360 heads milled 40 thou. with some...