Search results for query: *

I have for sale a pair of used shock plates from Mancini Racing P/N MREAR434. Mancini Racing Shock Plate Set They have very little installation time on them. Unfortunately, there are no studs to mount the shocks to. The ones that were on these plates were completely wrong so I absolutely do...

I have for sale a used Jeg’s roll bar helmet hook P/N 555-70032. It fit the 1 ¾” diameter roll bar tubing. It’s in excellent shape with no issues other than a little wear in the hook area. JEGS 70032: Billet Aluminum Roll Bar Mount Helmet Hook Fits 1-3/4" Diameter Roll Bars - JEGS It’s made of...

I have for sale a very little used Pittsburgh snap ring plier set P/N 63845. It has the pliers and 4 individual heads. They are all in excellent shape and work well. I would like to get $5.00 for everything plus the shipping. Ken Edison, NJ

SOLD pending receipt of payment. I have for sale a very little used remote starter button from Cal-Hawk P/N CAPRSS. Robot or human? It’s in excellent shape and works perfectly. I would like to get $6.00 for it plus the shipping. Ken Edison, NJ

I have for sale a very little used OTC 5-ton gear puller, P/N 1024. OTC 1024 2 Jaw Puller | ToolDiscounter It’s in excellent shape with no issues at all. I would like to get $30.00 for it plus the shipping. Ken Edison, NJ

I have for sale a used Cen-Tech timing light P/N 40963. It works perfectly and is in great shape. I would like to get $10.00 for it plus the shipping. Ken Edison, NJ

I have for sale a used parking brake handle attaching bracket from a 1968 Dart. This is the bracket that bolts to the bottom of the dash and holds the parking brake lever. It’s in excellent shape and comes with the original attaching nut. It’s clean and ready to install. I would like to get...

I have for sale a very little used Auto Meter analog voltmeter gauge P/N 2645 that is in excellent shape. AutoMeter 2645 AutoMeter Z-Series Analog Gauges | Summit Racing This gauge is has a 45 degree sweep and goes from 8-18 volts. It is 2 1/16” in diameter, has a black face and a red needle...

SOLD pending receipt of payment. I have for sale a used ETQ 1800 portable generator Model TG12L31. This generator works perfectly and is in excellent shape. It has two 110 volt outlets and both work fine. It always had the Stab-bil fuel additive so no gummed up carb. If you look closely at the...

Selling for a friend who had these items as excellent spares and would like to sell as a package. A Mallory #30480 Promaster S/S Ignition Coil with the rubber mounting feet along with a Mallory HyFire VI-AL ignition control box #6853M. The ignition box comes with the installation instructions...

I have for sale two metal signs from Open Roads Brands. One is a DODGE sign with the Mopar pentastar, while the other is Mopar of NoCar. Amazon.com Mopar Or No Car Metal Sign | Hobby Lobby | 1629963 Both of these metal signs are in excellent shape and also include the attaching screws for...

I have for sale a used trailer tongue ball lock from Master Lock, P/N 377. It works fine and comes with the 2 original keys. This ball lock fits the 1 7/8” and 2” tongue hitch bal. Master Lock I would like to get $15.00 for it with the keys plus the shipping. Ken Edison, NJ

SOLD pending receipt of payment. I have for sale 4 new TQ carb spacers/insulators that measure approximately ¼” thick. 3 of them are made from phenolic resin while the other is from regular gasket type material and has crush resistant spacers on the corners to prevent the gasket from crushing...

I have for sale a used transmission dipstick tube and locking dipstick for the BB 727 transmissions. The locking stick is a requirement for NHRA completion. I believe that it’s an Allstar Performance piece P/N ALL69121. Allstar Performance ALL69121 Allstar Performance Locking Transmission...

I have for sale, a pair of used Heim ends with the female ½-20 right hand threads. These are in excellent condition with no issues. Unfortunately, there are no marks of any kind to be able to tell the manufacturer. Amazon.com The link is the closest one that I could find that matches these...

I have for sale a 68-69 Dana 60 B-body rear housing with the 4-series Dana Powr-Lok carrier set up with 5.13 Dana gears. It’s got the ring gear spacer plate to make it work. Based on the BOM (Bill of Materials) 602957-2 code stamped on the axle tube this is an original 68-69 B-body housing that...

I have for sale a pair of what looks to be, Top Street Performance fabricated aluminum valve covers for the small block LA engines. These valve covers have very little run time on them are near perfect. Included is a PVC valve for the one side and a Mr. Gasket push in breather, P/N 4029G for the...

I have for sale a fairly new, very little used Dorman aftermarket replacement small block LA timing cover P/N 635-400, for the later, aluminum water pump applications. This timing cover is very clean and is painted. Dorman 635-400 Dorman Timing Covers | Summit Racing. The four lower attaching...

I have for sale a pair of used Edelbrock Performer RPM closed chamber aluminum heads P/N 60775. These heads are clean and in excellent shape. Ready to bolt on. https://www.summitracing.com/parts/edl-60775 In addition to the complete heads, I am including a set of ARP PRO head studs P/N...

I have for sale a very little used MSD Pro Billet distributor for the small block engines P/N 8534. It’s in excellent shape and has been sitting on the shelf for a while so it’s time to sell. It worked perfectly when on the engine. https://www.summitracing.com/parts/msd-8534 Also include with...

I have for sale a pair of 340/360 A-body engine mount brackets and biscuit mounts that will fit the 67-72 A-body cars. These mounts were in a 1968 Dart bracket car. The driver side biscuit mount is the OEM rubber design and was used in conjunction with a torque strap while the passenger side...

I have for sale a very little used Proform 750 cfm polished dual feed, double pumper carburetor. It’s in excellent shape and can be used right away. https://www.summitracing.com/parts/pro-67200 In addition, I have a very nice Mopar Performance single plane intake manifold for the SB LA...

I have for sale a used CSR small block LA, blue electric water pump. It works perfectly and has all the attaching hardware, front cover gasket, the backing plate, fuse and on/off switch. https://www.summitracing.com/parts/csi-903nc https://www.summitracing.com/parts/csi-903plate-c I would...

I have for sale a used CVR billet thermostat housing P/N TSH6CL. It is the swivel hose inlet design so can turn any direction based on the upper hose position of the radiator. https://www.summitracing.com/parts/cvs-tsh8cl It’s in perfect condition and has the O-ring design for sealing to the...

SOLD pending receipt of payment. I have for sale a very little used ATI SFI certified small block front balancer that came from an internally balanced 360/408 stroker engine. It has 5 passes on it and about 9 dyno pulls. ATI Performance Products ATI917392E ATI Super Damper Standard Harmonic...

I have for sale a used Mini starter from Summit Racing, P/N SUM-820441 that’s in excellent shape. The car was rarely raced so very little time on it. Summit Racing SUM-820441 Summit Racing™ Mini High-Torque Starters | Summit Racing It was bench tested and works perfectly. I am also including...

I have for sale a used engine lift plate from Jeg’s P/N 80044. It’s in excellent shape and comes with the attaching bolts and washers. It can hold up to 1000 lbs. and will bolt to any intake with the square bore or 4500 series carbs. I would like to get $10.00 for everything plus the shipping...

I have for sale a used Moroso #63657 radiator overflow tank. It’s in excellent shape and has no issues. I would like to get $25.00 for it plus the shipping. Ken Edison, NJ

I have for sale a very little used 5-Point, Red, RCI, 3” wide driver restraint system. The belts expired in December 2023 so can’t be used for NHRA racing unless they get recertified. They are RCI P/N 9510B. These belts are in excellent shape with no issues at all. Just the expiration date. I...

I have for sale a used B&M SFI certified flex plate P/N 10230 and fits any big block or small block engine using the 727 trans. There are no issues with this flex plate and it comes with ARP PRO 12-point attaching bolts. https://www.summitracing.com/parts/bmm-10230...