NAPA Fleet mechanical end lift model #5-22, 3,000 lb. capacity, 9" lowest setting at lips and 34" at top of lift. raised front end of G30 small block van with it...your arm gets a good work out! Serial # is 22-426 so it may be for Hemi cars only (snicker,snicker). Pick-up only please.
got this from a buddy so long ago I'm sure we've changed area codes since then. he scavenged parts, put it together, I got it from him to put in my garage. welll, I did put it IN the garage, just never installed or wired it. so, before I break a tube, somebody come and get it and you worry about...
Speedaire compressor, 1/2 hp 80 lb max pressure. motor hums when plugged in, doesn't know rest of the song. tapped tank top, bottom and sides with ball peen hammer and didn't notice any difference. can't say the tank is rust free, but I didn't put a hole in it or hear a dull thud. IF I had room...
Yes, as it looks. We tried a battery, got a single click. Starter? Starter relay? And probably, a few gallons of fresh gas.
Ooops! thought it said sold as is, shouldn't answer when half asleep. bed is solid, floor is crusty but if you stomp your
foot it does not go thru...like my old Chevy.
67" wide X 21" deep and currently 29"tall. while a little short for me, it is an invaluable working surface. also included, is a 48" wide X 96" deep "holding" area. great for "stuff" or sheets of plywood to pull out and cut to length. currently the rolling aspect is people power but with a...
used, missing wheels. looks like it had been sat on. straightened grill and housing out well enough that the blade does not hit. variable speed motor, a little too big for my garage...it would stir up so much dust I'd have to leave. pick-up only please. Thanks for the ad! Bob
homemade,2 x 6 top boards, 22" deep work surface, 25" from front to back, 35" tall work height, 6" foot wide, shelf is 1 by's. has holes drilled for vise, not included, some cupping in the top boards. pick-up only. Thanks for the ad! Bob
see pictures,have more if interested. Craftsman jigsaw is only inoperative tool.
Craftsman grinder/sander: 1/2" electric impact; Craftsman wall mount/carry case with 3/8" drill,orbital sander and tilt jig saw with circle attachment.
pictured is everything I removed from it; the drive belt would need to be replaced. I have pictures of the unit before I took it apart for placement of the motor and pulleys.
Thought about your question;yes, it is "complete" with std. 3 jaw chuck, 4 jaw chuck, face plate and dog bone, misc...
as seen in pictures, I started to take apart for cleaning and to rewire. In the interim, a family friend was selling their metal lathe that was a little larger and had the milling attachment. The unit for sale belonged to a co-worker's father. He says he remembers carrying this thing out of a...
neither, repurposed it.
that would have to be made by new owner.
hmmm, that's possible. maybe if hole was enlarged?
my thought was to weld that tube to the top plate or to another plate
that could be bolted to the top plate, which has threaded holes.
or grinder or transmission stand, limited only to your imagination. The base is 44" long, 29-1/2" wide, 38-1/2" or so tall. The pads are 1/4" and the tubing thickness of the upright is 3/16". There are holes in the upright to allow wires to pass thru in it's previous life. The upright unbolts...
bought this lathe and then a larger one became available. I believe the pictures and title answer most questions. any others just ask away. Thanks for the ad!