1975 PLYMOUTH DUSTER 7 1/4 REAR END 2.76 GEAR IF I REMEMBER RIGHT DRUM TO DRUM $ 25.00 PICK UP IN WESTEN MARYLAND 21783
CHECK OIL DID NOT LOOK BAD AND TOWED THE CAR 3 HOURS TO MY HOME NO NOISE .
A set of Caltrac bars for a body # 4200 good shape some paint chips about 15 1/4 mile runs on them then sat on the car for 3 years. Come with all parts $320.00 most shipping is about $45
but send your zip code . I am in WESTEN Maryland if you want to pick up . P M me
MR GASKET VERTIGATE SHIFTER 4 FOUR SPEED A BODY I have a Vertigate shifter that i bought years ago and never used or mounted it
it is for A body and has surface rust on the black parts from sitting in my garage for years box rotted away has light scratches on chrome and very small chip in...
First MOPAR i bought my wife couldn't have her driving a round in a vega any more . was a friend of mines car and he got a 1970 road runner.
1970 dodge challenger 318 slap stick 8 3/4
My first Mopar 1971 DUSTER 340 4 SPEED 3.91 POSI I bought it in 1976 it had a 318 because the guy before me blow it up i found a 1971 cuda in a junk yard and bought the engine for $200.00 sold it in 1990 .
I had 3 sets of magnum heads i bought over the years when i went to use them the machine shop told me there were all cracked and there were.
Don't wast your time or money on used magnum heads you will burn your valve and seat
Looking for left rear tail light bezel that still has chrome on it and no broken studs can have some pitting i no there 50 years old or older. send picture . Thank for looking . 74 DUSTER
HERE are some parts i had removed from a 75 duster . if they don't sell there going to the scrap yard . see if there is some thing you can use.
oil pan $ 15.00 plus shipping oil pump pick up $5.00 plus shipping...
Hi i left queens N Y back in 1980 There was a dodge dealer there and i use to buy parts there but i don't think it was call ridge wood dodge.but could be wrong
I think the plate you have came from a car lot that was about 1/8 mile down the road . let me do a little checking. It was on...
Had to remove all the rubber filler behind the bumper and sides to get it to fit back in . If you cut the front point off were my center of the bumper is hitting it would go right in some more . but is going to be a drag car but will be tagged . This was the blue car in my Avatar
didn't have to drill the frame the holes are all ready there just pass bolts up from the round hole that's already in the frame and
there is a round hole in the front of frame rail
Installed 1970 duster front bumper and brackets 0n my 1975 duster went on with only one mod so far removed bumper shocks and put two 1/2 with 3/4 head bolts
that came off the car cut the press on washers that were cracked and replace them with thick cat washers that i made flat on top and...
When i did my 1970 they were all black my 1971 were black and charcoal got them from P G MOPAR very nice and were 3/4 the price of LEGENDARY this was in my 1970 had car 8 years before selling it.
Was thinking of re chrome but wanted to see what was out there first as that pot metal is hard to get the pitting out to re chrome don't mind pitting if you cant see it when on car.