Search results for query: *

I tried this once with extra foam I had after cutting my squares I used on the bottom of my hood so I could sit it on the roof in the pits. It looks like it would have worked fine I just worry about it getting soaked if it rains so that’s why I was thinking some trimmed foam glued to a plastic...

That’s a great plan for a long move like that and by the way that’s one sweet Demon!!

I never knew that. That’s pretty cool!

Hadn’t thought of trying this. Some that I’ve seen look to small to fill the gap but I’m sure there are bigger ones.

I was thinking of something like this. A plastic cover the shape of the scoop with foam glued on the back to go in the hole and hold it in place with the plastic keeping the foam from getting as wet

This is one reason I’m wanting to try this. Got caught in a fairly heavy rain and that scoop directed plenty of water under the hood ha

I’ve looked around and haven’t had any luck finding a plug for this style hood scoop. I open trailer the car and while I do use a carb cover I have been thinking about having a scoop plug for when I haul it. I have some foam, could I just cut to fit and glue a plastic sheet cut to fit on the...

I can imagine it’s no fun on a newer vehicle! Thanks Del and @TF360 for the replies/info

Great info, thanks!

This is a parts car he bought for parts for his 68 GTS. I need to remove the cluster, wiring, switches, and dash pads and I just assumed (maybe incorrectly?) that all that would be easier with that vent out of the way, especially since I don’t think he will be using the AC setup in the other car.

Helping my uncle work on his Dart. I have no experience working with AC in these cars. Was wondering how these boxes are attached under the dash and how hard they are to remove. I won’t be near the car until the weekend so I’m just curious as to what I will be looking at. I assume this is a...

Thanks for the help and advice all. Job is done. Far from perfect but much better than where it started.

Thanks again! So argent in the areas you highlighted here around the bottom and sides, but the center parts of the grill are just the bright aluminum correct?

This is great! Thank you. I can do that, just a little more masking than I had hoped for. I even have some argent paint left over I think. Light argent I painted a Demon grill with and dark argent from a rallye wheel cap. This looks like the dark argent here. I’m glad I asked before I started...

Thanks for the replies all! I had thought of paint thinner and the paint remover but hadn’t heard of oven cleaner for that purpose. I knew it was aluminum under the paint but I was unsure about the original paint. So I guess what I’d say is I’m not trying to preserve the OEM finish but rather...

It looks like rattle can flat black. The car it came off of set outside under a tarp for several years.

Hello all. Picked up this grill for my uncles ‘68 that someone had blacked out years ago and it’s looking awful. Is there a paint remover spray or something similar you recommend to strip all this black off so I can start over? Thanks.

I have heard good things about trick flow. I’ll look into it. Thanks!

My uncle is in the market for a set of heads and possibly rockers for his 340 build. Thought we would see what is available used before we looked at new ones. Just seeing what may be out there. Thanks.

Bump - price reduction $475 shipped to your door in the continental US

Only ran for a few start ups and 1 day at the track (4 passes) then removed and stored. Currently selling new for $770. Asking $500.

Thank you. I’ll pick one up

Replacement master for 68 dart. Does this keeper stay on or is it just for shipping? Looks like it is to hold the piston in the MC. The master still fits flush against the firewall so there is no interference there. If it does stay, does it take the place of this style piston stop? Trying to...

Thanks again for the replies and info. The main reason I did the ammeter bypass like I did was that we don't have a dash cluster for him at the moment and I knew it wasn't safe to have the red and black ammeter wires lose in the dash so I connected them with a small bolt and taped it really...

A lot of good info here! But this also leads me to another question I have. There is no ammeter currently as the dash cluster is out. I have attached and taped the red and black ammeter wires together for now but as I understand it the true ‘bypass’ involves more than that

The circled hole is not tapped. Neither are the other two. Here are close ups of the two field terminals

We are working on my uncles 68 Dart. For now just trying to get it running and moving before we worry about what’s ‘correct’. My first question is can I use an alternator with 2 (I assume) field terminals when his car only has wiring for one (green.) I have that alternator and we are hoping to...

M63 melling pump. Came with an oil pan kit I bought, never installed. Only opened for pictures. Selling because I want to run the 63HV pump. These sell for around $100 new - asking $70 shipped to the continental 48.

These seem to be backordered everywhere. Wondering if anyone had an Edelbrock Victor 383 (2886) intake they wanted to sell.

Thanks but that is a little more than I’m looking for. I just need the top plate (and technically just the front plate as I’m switching to manual from auto.) I’d hate to split up that beautiful set. That should go in a car that had that tach originally, looks to be in great shape!