Search results for query: *

I pulled these from a 1969 dart with a A-Body 8 3/4. They measured 11in but I think there for 10in brakes . I know there some experts on here that know what the A-Bodys came equipped with. No trying to mislead anyone but I believe there are for 10in brakes . I will cut the emergency cable...

Used set of A-Body 4in axels. Bearing seem good but I can't tell how good.didnt make any noises going down the road. Comes as you see them. $250.00 . Pick up in Sabina Ohio 45169.

1966-72 Mopar A-body 8 3/4 rear end axle housing. I just pulled this out of 1969 dodge dart gts. I needed the center checektion for a customer and dont need the housing. Started cleaning this up with my air nibbler and i noticed at the top of the housing it poked a pin hole in it. It will need...

This was pulled from a 1969 383 dodge dart . complet rearend drum to drum. 489 case 3.23 sure grip 4in bolt pattern. Turns freely. This will need to be gone through before you run it.will need new breaks drums turned. The sure grip fills tight with a little back lash like they should. Needs...

1968-69 big block 383 HP GTS Dart ,A body mopar exhaust manifold .the manifold is in great shape not cracks but hard to make out the date code. Casting # 2946729 . This should work on a 1967 but the casting numbers say it's for eaither or 1968 or 69 383hp A bodys. Comes just as you see it .can...

I picked this 1968-69 big block 383 GTS Dart ,A body mopar exhaust manifold up and a A Body 8 3/4 comeplet rear end ill be listing today also ,got them at the mopar nats for a project but sold the car so I don't really need these.the manifold is in great shape not cracks but hard to make out the...

I bought this a few years ago at a swap meet and was going to use it on a 68 barracuda that I was going to build as a super stock car. I have gotten rid of the car but I still have the seat it didn't go with it. I'm not for sure what this came out of but it looks really close to one of the seats...

1963 Dodge polara 330 station wagon.super solid car.S&W racing put a cage,tied the frame and moved the leaf springs in.i have the paper on it.wind shield has a new rubber gasket,wing windows have them too.rear side Glass has new rubbers to.car has all the parts to it but a gas tank and a rear...

1971 340 #4972s thermoquad manual shift carb.correct with or with out air.i have never ran this carb.it came with a 70 barracuda I bought . linkage moves freely.air fuel screws turn.will need a complete rebuild and detail to be OEM new looking. $350.00 In Sabina Ohio 45169

1963 plymouth fury.rolling body.8 3/4 rear end,power steering, power brakes, v8 k member. 2 door hard top.bucket seats.comes with the wiring harnesses. Has the gas tank,tranny cross member. Comes with 2 nice front fenders but do need a little work but nice.center of trunk pan needs replaced.the...

This is a big block A-body exhaust system if your running hooker super comp fender well headers on an A-body. The car in the pics is the car it came off of.it has a 440 with edelbrock rpm heads with the motor in the stock location. Tranny mount is in the stock location. Has a dana 60,exhaust...

Ok let's try this again. This is being sold as a roller now.440 and tranny have been sold.1972 dodge demon.started life as a 318 4 speed car.needs inner fenders fixed from fender well headers cut out.has racing buckets switch panel b&m shifter.has a dana 60 with 513 gears with ladder bars and...

1972 dodge demon has a 1970 30 over 440 with a 509 cam.750 holley.msd distributer. 6ALbox 2 step fender well headers.cheeta reverse valve body with a new 3500 tci converter.B & M shifter .8pt cage.has a nice switch panel.new quarters,body is solid,dana 60 with 513 gears and a spool with mossor...

This is a truck dana i had cut down that is 55 5/8 in long.this would work in a A-body.the A-body oem length is 57 1/8 long.this would be good for more tire if your going to minnie tubbe your car.it has new doctor dif 35 spline axels 1350 yoke.new spool with a 4.88 gear.new chrome cover.long...

This a good used oem 1970-71 dodge dart rear bumber with the mounting brackets.in good driver shap .not perfect but not bad.has a couple small dings and some small scratches.like most bumpets do but very useable.one bumper bolt needs replaced.good driver bumper.can bring to the mopar nats this...

One good used 1973 plymouth duster LT hand tail light with the housing.i dont see any cracks.needs cleaned up. 45.00 with free shipping Sabina ohio 45169

Passengers side front fender extension.this one is not the pop metal one its the fiberglass one.has all the mounting studs.i do have others but they all need work.this one looks good. 50.00 Sabina ohio 45169

I BOUGHT THESE ABOUT 5 YEARS AGO AT THE MOPAR NATS FOR A DEMON I HAD.I NO LONGER HAVE ANY A-BODYS SO I DONT NEED THE SPRINGS NO MORE. 150.00 FOR BOTH WILL HAVE PICS TOMMOROW SABINA OHIO 45169 MONEY ORDER OR WAL MART TO WAL MART CAN BRING TO THE MOPAR NATS IF YOU ARE FAR AWAY TO SAVE ON SHIPPING...

1966 coronet project car.no motor or trans,has a 8 3/4 but no 3rd member.needs quarter work .I have some patch panels for it.has a few small spots on the floors that will need patched.trunk is not bad but has a few little spots to.all the parts you see go with the car and that's all I have for...

1964 DODGE DRAG CAR,WILL SELL 2 WAYS ONE WITH OUT REAR SUSPENTION ,REAREND AND REAR WHEELS AND TIRES FOR $7500 OR WITH FOR 9500.HAS BEEN MINNI TUBED.HAS A NICE NEW AF/X SCOOP FROM SLED CITY FIBERGLASS.IT HAS A NEW DANA 60 WITH 4.88 GEARS AND 35 SPLINE AXELS,NEW STRANG COIL OVERS AND LADDER...

'73 & Up Poly Spool 273/318 or 340/360 Replacement Kit Original V8 Spool Mount Replacements available for '73 & up A,B,F,M,J-Body (and '74 & up C-Body) 273, 318, 340 and 360 engines. Kit includes powder-coated brackets, polyurethane spool inserts, grade 8 bolt package. like new but have been...

Hurst T Handle in great shape.this would be cool in any Mopar. threads look good. 35.00 free shipping Sabina Ohio 45169 Pay pal

This is a A-body gas cap that will fit most A-bodys.some of theses caps are different on different year A-bodys ,the depth on the inside of the cap is longer or shorter on some years .this looks to be a shorter one.so please look at the pic to make sure this is the one you need.its dark green...

selling my 1964 Plymouth wagon,was the fire chiefs car in Washington court house ohio for many years .I got it years ago and sold it to a friend but he passed away 2 years ago and I bought it back from his wife.he had done a lot of work to the car,he put in a new 1971 383 and new tranny but the...

1969 big block 727 A-Body ,HP 383-4 part number 2892091 .good for rebuild Sabina ohio 45169

This is a 1972 dodge challenger I bought as a roller drag car,has no motor or tranny just a roller that I have been putting it together.i have put 1970 sheet metal on it ,fenders,doors and grill.has a very nice lift off tall six pak hood. new inner fenders ,new front wil wood brakes.new crt fuel...

1968 A-BODY bucket seats with the seat tracks,will need redone to be nice.pick up or if payed I can bring to the mopar nats next week. pay pal 45169 ohio

This a nice set of CPPA big block a body headers. 2in tube 3 1/2 collectors 3/8 flange. These have only have light surface rust on them ,very solid ,they just have been setting. Just needs blasted and redcoat with high temp header paint. $300.00 Sabina ohio 45169 pay pal

1969 Dodge dart GT rolling project.was a 318 console shift bucket seat car.solid body,no rust in the trunk.all the glass is good.super stock hemi bolt on hood.needs put together.clear title. Sabina Ohio.45169

8 3/4 Sure Grip (CLUTCH) Type 3.23 741 case , 10/09/1967 date. this would great for just a daily driver. Sabina ohio 45169 400.00 pay pal can ship for 80.00