Search results for query: *

  1. G

    [WANTED] Big Block K-Member

    Give me at least a week. Doctor Monday to clear me to race and then if cleared right off to Bakersfield double divisional for the remainer of week.
  2. G

    [FOR SALE] HP Head Liquidation.......................$150 pair

    I have currently eight left and they are sonic tested excellent and mostly Hot Tanked/Magged/Acid washed and inspected good. $750 if 030/040 $1250 to $1,450 if Standard/ 020. I would sell one or two of these. I know that is not Junkyard prices but these are the best I have found over the...
  3. G

    Local 80 year old racer

    Desire and Determination are Vital in Life. Especially as life and age catch up to you and they will. I spent a year plus in a Wheelchair after a severe Boat Racing accident. I am grateful every day to God that I am now standing on my two feet! God has been so very Good to Me!!
  4. G

    Once a year Wally Race LVMS = Jon Wins

    Last weekend of Bracket Series @ LVMS they feature the one Wally race at our local track of the year. Sportsman Final: CW Hoefer (Current Winternationals Champion) put up a .006 to Jon .018(Both Stock Eliminator Champion racers). CW drops him a finish and Jon takes the stripe 1 off his dial...
  5. G

    Orange County International Raceway

    I am not sure. We all looked like that in those days. I had hair to the middle of my back an a Fu Manchu Mustache six inches long.
  6. G

    Tune up questions

    Not a timing issue I do not believe. Ignition failure issue or Vacuum Diaphragm linkage/ way wrong spring in it. Perhaps a broken inner spring or two if you have dual springs.
  7. G

    [WANTED] Big Block K-Member

    68 I believe (I will look for a part number) $175.00 A very nice rust free no issues or damage ever/ Free delivery to Long Beach harbor where all my European stuff ships out of.
  8. G

    Idle Transfer Slot on secondaries?

    The way I have done it for 60 years (Right or Wrong) is to have no transitional slots exposed. . If required, I drill small holes in the throttle plates to get the idle high enough to tune with the Air Bleeds. However, I deal with very radical engines with very little vacuum signal.
  9. G

    Local 80 year old racer

    Satchmo Page : Early Professional Black National League pitcher who pitched professionally until his 50's said this == Don't look Back, because whatever is chasing you might be Gaining!!
  10. G

    Pushrod measurements 440

    I like to generally see 1 to 1 1/2 thread below the rocker. All the adjusters I use have a recessed area in the adjuster and that needs to line up with the oiling in rockers, If the pushrod is too long or short the rockers can't oil and that will burn up the top end in short order!
  11. G

    Local 80 year old racer

    80 is the new 50!
  12. G

    Super Victor port matching

    Looks good! I set up a table in the bathroom and trim the gaskets in there. Otherwise, I am always in to big a hurry and rush thru and screw up the center dividers to many times (End up being very skinny). I have plenty of time while sitting there!
  13. G

    [SOLD] FREE. SMALL BLOCK 727.

    I will buy the B housing also if still available!
  14. G

    [SOLD] FREE. SMALL BLOCK 727.

    PM also sent. Should have done that first!
  15. G

    [SOLD] FREE. SMALL BLOCK 727.

    I would love to have it!!
  16. G

    Impending surgery: Prayers Requested!

    Thanks! I appreciate your good wishes. As far as the Woman, I don't miss her all that much @ 76 years old!! Although I thought I had the best Wife money could buy!
  17. G

    stamped steel LA rocker arms

    Back when the 340 was new we broke plenty right at that spot even with stock spring pressure. I do believe the 340 rockers were heavier duty from what I remember back them.
  18. G

    Impending surgery: Prayers Requested!

    Anyone who is curious about us. Goggle: John Irving Drag Racer and my boy Jon Irving Drag Racer My wife could not spell, but she could sure Dance! Last time I will marry a Girl 1/2 my age. She vanished from us when Jon was still a Baby.
  19. G

    Impending surgery: Prayers Requested!

    I appreciate that! I have owned 3 M code 1969 GTS Darts all bought from Saddleback Dodge in Calif. Also 3 1968 Factory 1968 Hemi Darts. All back in late 60s and early 70s.
  20. G

    Roller Rocker Side Clearance

    I run 8 to 12 on my race cars that never see the street. However on my street / strip cars I run 25 to 30. On my street only stuff, I do not run aluminum rockers. Jesus is Lord!
  21. G

    Summit 10% Discount Coupon Available Again!

    1000 was the number of conversations which is all that are allower. I removed a couple of hundred so now open!
  22. G

    Summit 10% Discount Coupon Available Again!

    I hit 1000 Now fixed! Expire: 12/31/2024
  23. G

    Camshaft for 273

    I think that cam would be fine. All cams are a compromise that moves power around from one RPM range to another. At full throttle you will seldom be below 2000 for very long unless you are in way the wrong gear.
  24. G

    Impending surgery: Prayers Requested!

    May God shine his continence and bless those that took the time out of their busy day to put me in their prayers. The prayers of a righteous man availed much and all believers are made righteous through the blood of Jesus.
  25. G

    Impending surgery: Prayers Requested!

    Well Surgery went well yesterday, and the Doctor said the first 3 Days are the most critical for any problems arising. I found some more Summit 10% coupons, PM me if any of my friends on this site could use a couple of them. My world is bright and shiny again for me! God is so very good!!
  26. G

    [FOR SALE] HP Head Liquidation.......................$150 pair

    I am down to about 5000 sq. ft. of Mopar Stuff. Let me know what you are looking for as I owe you a favor!
  27. G

    Summit 10% Discount Coupon Available Again!

    A few: PM me as if I post it hear it may be used before you can use it and it is only good for one transaction
  28. G

    Hood clearance question

    If engine is on stock mounts (Stock Location) you should be fine.
Back
Top