Looking for a good dual plane intake for my 440
I would like a Edelbrock 7193 but not a must have.
You can txt me pics and price of what you have (phone number removed by moderator)
anyone out there running theses rockers on a 440 with stock type wedge head. I have 452 castings on my engine. running the old Herb McCandless .650 lift comp cam.
what clearance issues have you had.
so far had to cut them for valve spring retainer clearance and now it looks like i may...
anyone know where I can get the pigtail or harness that goes from the firewall bulkhead to the wiper motor.
somewhere along the line someone cut the wires off and threw the female plug that plugs on to the motor away.
or can tell me which wires go to which terminals on the wiper motor...
I have some spindles leftover from a previous project but not sure what they are.
I know they are A-body drum brake spindles, my question is how do you know if they are for 9" or 10" brakes
looking for ideas and tips on integrating latemodel car parts into my 1968 dart.
wiper motors
power windows
lighting
some of the new car creature comforts and such. with pics and specs if you have them.
not looking to buy expensive conversion kits. I'm talking low budget DIY type...
I just pulled some heads off a motorhome 440 and it has flat top pistons, and the heads are 452 casting with the 5/8 small tappered seat spark plug. is there any performance advantages between the big plug head and the small plug head. the small plug head valves look big havent pulled them...
1) which is the better to get 5.7 or the 6.4 ?
2) truck or car eng?
3) short block from a car or truck?
4) heads from truck or car?
5) intake from a car or truck?
6) trans from the car or truck?
7) pcm from a car or truck?
8) which holds up to more power the auto trans or stick shift?
9) any...
dual pickup distributor for a 440 ?
who makes a dual pickup distributor for a 440, factory or aftermarket? if factory what was the applications they came in.
or if you have built your own could you give me info on parts you used to accomplish this.
I reworked the cooling system to a remote pump, a custom water pump replacement manifold, and a honda civic aluminum radiator. I hope to take it to the track friday nght if the rain will ever stop.
I have a computer question to those that mght know. When you go to respond to a advertisement in a website like Craigslist or a Business my computer always opens Outlook Express which I dont use, how do you make it open the email system you use, I only use Yahoo for email, and my operating...
I have a Solid Roller cam for a big block dodge that I have no idea where it came from. it was in a eng. that was in the car I bought as a roller because the eng. was hurt. these are the only markings on the cam.
DH2
812a
689356
I recently got a Dane and looking at getting Health Insurance on Her. Any suggestions on companys to use and the ons to stay away from and that's not to expensive
Any of you watch your favorite TV programs without cable ??? And if so how are you doing it ? what other equipment is needed besides the internet ??? Also what do you use to record your shows when your not there ?
Tired of paying outrageous prices to watch shows that don't come on a basic pkg...
those of you who have run these have you had to clearance the rocker for the pushrod cup. I have 2 sets of pushrods one has the cup diameter larger then the other. the larger ones have interfearence with the rocker at full lift. so i put the smaller ones in. took the car out made my first pass...
this rearend is 46-1/2" from flange to flange, has a T/A aluminum cover, moser 33spline axles and spool, 5/8" studs, it has ladder bar brkts,wheelie bar brkts, adj. coilover shock mnts. 4.56 gear. $1000.00 or will take parts in trade
who makes this hood. I bought it for my 67 barracuda used and it has no markings or company names on it. I'm about to buy a 68 Dart and want one of these for the dart.