Search results for query: *

Bump

Bump

Bump

Hey, I have a set of axles that I pulled out of my '68 Barracuda so I could throw in a set of 5x4.5 and run different wheels. These have good Green bearings on them. For some reason 1 of the axles is missing a single stud, but I would think that your local auto parts store has a replacement...

Meaning the bridge between the 2 banks running down the middle of the carb opening? I believe mine does not, as I used the Edelbrock gasket 9266 on mine. In fact i have a brand spanking new 9266 gasket that I'll throw in to the buying party. http://www.summitracing.com/parts/EDL-9266

Bump

Bump

Bump

Bump

Bump

Somebody needs this beautiful carb as a late Christmas present to themselves, right??

I'd be interested in any reasonable offers, or else it's going on eBay.

Hey, I have for sale a like new Quick Fuel carburetor. Here's a link to the Summit listing for all the particulars. http://www.summitracing.com/parts/qft-bd-680-vs It also comes with a Fragola 930002-BL Black Size (-6) x 7/8-20 Dual Inlet 4150 Fuel Line Kit, here's the Summit link for it...

Sweet, like the look of that. I hope it looks that good. I'm not expecting to see them for about 2 weeks though.

I just ordered a set of stock height, 6 leaf springs from them. Mind if I ask why you're selling them?

I'll take the upper ball joints. Those are the "small" one's right? The K704. And are there 2 of those, and is it $10 a piece, or $10 for the 2 of them? Thanks

How would I know? The IFR's don't have anything to do with the CFM flow of the carburetor. It is a 670 CFM carb, that is determined by the venturi sizes. The IFR's are often drilled to address a lean tip-in from idle. That is why I did it.

Can you be more specific??

Hi all, I have a Holley Street Avenger 670 VS for sale. It currently has 68 primary, 76 secondary jets. A 32 squirter, orange cam, and the black vacuum secondary spring. The Idle Feed Restrictor (IFR) has been drilled and tapped to accept 6-32 brass set screws and currently has a .031...

Hey, I've had this carb sitting on my shelf in the shop for years. Time to clear some stuff out. This is a 625 cfm with the Mopar linkage arm. It's going to need to swim in some carb cleaner for awhile and have a $25 rebuild kit thrown at it. It has the fuel line adapter so that the fuel...

Hey, I have a set of (4) aluminum wheel adapters that go from 4" to 4.5". I just used them for mock up with some wheels prior to switching over to 4.5" axles and rotors. Prior to me getting them, someone "clearanced" some off the back side of 3 of these for reasons unknown to me. I don't...

Got my bolts today, they look really nice. Come on everyone, make your orders, send your $$$.

PM replied. Thank you.

If no one is interested, I guess I'll throw these up on eBay this week.

They started off as smooth, I cut banana grooves in them with a dremel and cut-off wheel. Then polished them on my buffing wheel to get rid of any burrs. I had read an article about it in Mopar Muscle. I do have a stock set of shafts that came off of the stamped rockers if whoever buys it...

Hi, I have a complete set of 273 adjustable rockers, spacers, shafts, hold downs, and pushrods. I have 2 different sets of shafts, one with banana grooves that I cut, and one set of smooth shafts that I have from a stock set of stamped rockers. Buyer can choose which they would prefer, but...

If no one is interested, I'll be putting this on eBay.

Bump

They are popular with the Jeep crowd it would seem.

Hey just thought I'd see if there was any interest here before I put this on eBay. I have a Howell K247B universal fuel injection kit for sale. It is used, but in perfect working condition. Came off of a Jeep that didn't see too many miles a year. I have 2 different chips for it as well...