Search results for query: *

I am selling a 1969 Dodge Charger R/T front grill which includes both lh and rh hideaway headlight doors, center grill and lh and rh grill extensions. Also includes is the front clip which includes hood release assembly, headlight bezels. This was changed out my during restoration and...

Hello, just purchased an edelbrock ld4b intake manifold (it appears to have not been modified) for my 1966 273 motor. My heads are stock I was wondering what gaskets people are using or have experience with Anything to watch out for?

I am selling both left and right rear axels off 1969 Dodge Charger R/T using an 8 3/4 rear end. The rear end was changed out and upgraded during restoration. The rear end was working during before restoration. These are rare parts, that could fit other years of Dodge and Plymouth B Bodies...

I am selling brand new still in package Year One Inc part #J11LH black Front Arm Rest pad, 13” for 1966-70 B Body and 1966-69 C body. Oversight during my 1969 Charger RT restore. Great opportunity to pick up a new part cheap. MSRP is $55. big block mopar. Fits barracuda, charger...

I am selling a 1969 Dodge Charger R/T 440 cu High Performance water pump housing. Casting number 2780 987. The water pump housing was working when removed from the car during restoration and upgrading. big block mopar. Fits barracuda, charger, roadrunner, challenger. GTX, Coronet $20.00 or...

I am selling trim off my 1969 Dodge Charger R/T this is drive quality that can be restored or rechromed. big block mopar. Fits charger, $20.00 or best offer. Cash only. I prefer local San Jose, CA pick up I am also selling a complete Mickey Thompson ET Street tires and other 1969 RT...

I am selling a 1969 Dodge Charger R/T 440 cu High Performance Intake Manifold; The intake manifold has the following casting information; A2, cast date of 2/07/1968 with serial number 2806178. This is considered one of the best “muscle car” intakes. Same manifold for Plymouth super commando and...

I am selling 2 Mickey Thompson ET Street tires and tubes. These are nearly new, mounted and drove a few minutes, sadly to large for my car. My loss your gain. Mickey Thompson material # 90000000979 part # 3762 with the M5 compound (medium soft – good for general use). Section width 13.3 and...

I am selling a 1969 Dodge Charger R/T front grill which includes both lh and rh hideaway headlight doors, center grill and lh and rh grill extensions. Also includes is the front clip which includes hood release assembly, headlight bezels. This was changed out my during restoration and...

I am a pair of valve covers off a 1966 plymouth 273 cu . As you can see from the pictures are parts are there, stove pipe, oil cap and spark plug wire looms. Great Original condition. The 273 cu was the first of the LA motors and was used across the entire line of A, B and even C body cars...

I am in the market for a new carburetor; looking at the edelbrock 600 CFM performer series. There are 3 models to choose from that all have differences; with one marked for fuel economy and another performance The 1406 (fuel economy) seems to be the most popular (cheapest), has .098 primary...

not mine, nor do I know the seller https://sfbay.craigslist.org/sfc/cto/4691737489.html looks mint They know what the car is worth

Hello, I am looking for a fan shroud for my 66 barracuda. Running a 273 with a stock 6 blade fan to a 22 inch radiator. Non-AC PM with any shroud details and mounting hardware would help as well thanks james

Hello, my instrument cluster doesn't illuminate. Upon investigation, I discovered that there was no fuse. So I am pretty confident that a fuse would resolve the problem. Can anyone help me with identifying the correct fuse to use? It appears to be a 3 amp circuit, which would take a long...

Just picked up a RAC Tachometer part #63003580 to install (strap) on the steering column of my barracuda. I know it is old, kind of the point There are 5 wires, instead of the normal 4 Red-power Green-coil Black-ground Yellow-lights Blue-? Is the yellow a "hot" for lights and the...

Hello, Does anyone know the timing specs for a 1966 273? I can not find it Car is an automatic thanks

I am selling 4 wheels and tires (one set) of stock Plymouth steel wheels with beauty rings and Plymouth logo dog dish hub caps. Wheels are 5 lug by 4.0" measurements (small bolt pattern). Tires are in great condition and TBC Corp Classic Radial p185/75r14s. Wheels are in very nice condition...

I am selling a 1966 Plymouth 273 cu Intake Manifold, Holley 2bbl Carburetor and valve covers These parts are off my 1966 Plymouth Barracuda. The intake manifold has the following casting information; A2, cast date of 9/15/1965 with serial number 2536559. The Holley 2bbl Carburetor is a type...

I have gone through the forums on decoding the fender tag and the internet with out success I have a 66 Barracuda Under the paint section on the fender tag it has for my car 661 (which is light mauve) next to that I have two Bs Everything else I have found shows a space and than a B...

Hello, I bought a spectra premium fuel tank (CR11a)plus sending unit, lock ring for my 1966 Barracuda. The fuel tank does not ship with a filler neck seal. Nor does spectra make a seal :wack: Has anybody used these tanks? And what filler neck seal and where did you get it. My project is...

Does anybody have any experience with racing stripe decals? There are a couple of companies out there; Phoenix Graphix, Graphic Express and Classic Industries. And they are all about the same price for the set. They all seem about the same (only a couple reviews; some good, some bad) so...

Hello, Has anybody used 11karkrazy on ebay for front end suspension rebuild kit? 1964 1965 1966 1967 Plymouth Barracuda Front End Suspension Master Rebuild Kit | eBay Looks like it has all the parts you would need and great feedback rating Anybody have any experience? thanks

Work is nearing completion on the engine and frontend rebuild. Plus some of the other work taking place on the car The car has black interior and exterior and has all chrome in place. I will be putting the racing stripes on the car and plan to stay factory correct. Which of course gives me 6...

They seem to be the only place where I can find 14 x 5.5 small bolt pattern wheels for my gen 1 Barracuda Anybody have any experience? Good or bad

I am looking to change out my 13x6 inch wheels to 14s but still want to keep the original look with correct hub caps (part number 2781554) I am having trouble finding any information on the 14 inch tire wheels; how wide, spacing etc Any help would be appreciated. Also if anybody is...

How is everybody handling the insurance on their classic? My standard insurance agent wants $700 a year for a weekend-low mile car. Which is almost the same for my daily 2 year old car Any recommendations for classic car insurance? Not show car, lives in a garage type insurance

Hello, I just recently bought a 1966 Barracuda with a standard 273. It was suppose to be a commando, but was misrepresented by the seller (reimbursed me some $$) I plan to pour about 7 to 8k into the car, more for reliability (first classic with wife and kids). I do want some performance. I...