Search results for query: *

Just to show you one with me and hair. Also, with my mother & 72 Demon [background]. Have one with the zipper in my head. It is for the cover for my brain probe, now that I am a functional cyborg.

Sounds good. Have a busy schedule tomorrow. NO SIP for Bastrop county, so I can make the trip on Saturday. I'll need a USPS type address for the nav system. A phone number would be a help as well. PM here or email. Thx.

I am still need to find a right angle piece for the driver's side of the windshield trim for a 1972 Demon. Part can have a little "patina" to it, but otherwise needs to fit perfectly. Shipment will be to zip code 78602. Expedited shipment not required, PayPal is preferred method of payment...

Good article. Another way to locate holes it to mark package shelf on the bottom before. Using the same techniques, I am locating "Rear Air". Another way to spiff up instrument panel gauge clusters. Buy a length of shelf paper. Make a template> You could lighten things with a birch kind of...

...-Green/black Rear left +Purple -Purple/black Rear right POWER +12v Con Yellow +12v Ign Red +12v Antenna Blue -12v Return Black Tele mute brown * Illumination Orange * Note: The brown wire may be for an optional Bluetooth module I have seen. It would be nice to have the radio lose about...

Thanks for your kind words. I am in the process of laying carpet. I got some foam insulation that I put in the floor boards after the JB Weld had cured a few days. Now that the insulation is stuck down, the carpet is going in. The rear set carpet in in place. I am having difficulty finding...

Thanks for you comments. I have a block out of a 68 Coronetin the Demon. I am sort of wishing I had spent a little more time on the heads. The 73 340 used a 1.88 intake and a 1.60 exhaust valve. The stock 318 valves, and the ones in a 302 head, are 0.010 smaller. For the time...

Due to the virus frenzy, the Mopar show in Shreveport is being postponed. The club is discussing potential dates in August.

I heard this from my Freshman Latin instructor (owned a 1966 Coronet) "Chrysler products, you either swear by them or swear at them." I hear you, amigo.Last month, I put a new ignition lock in the Demon. For the first time since I bought the car, it can now with a single key and the column...

I am very glad I went through the drill of checking for holes in the floorboards again after I went over them with a wire brush. I found a colony near the buckle on the passenger side and a few more on the drivers' side towards the front of the car. Looks like I will be making up a bunch of...

Smart Man:thumbsup:. A happy wife makes for a happy life...but an unhappy wife can be a *****:soapbox:.

A question was put to me. "How do I find where all the holes are in the floorboards?" first, the floor needs to be free of the seats, and floor covering that includes all carpeting and floor mats. I put covers in every drain hole in the floorboards and put a bolt in every seat belt hole...

Heck, you're a Dentist (or a wannabee). There ought to be a dental pick you can slide down over the top, into the hole of the washer, and slide it out. Haf to laff, make sure the LCA is as far down as it will go before putting the bar into it AND that the adjuster is backed out far enough to...

Since last posting, the seat has returned from the upholstery shop. What a deal, it came back in less than a week and under budget yee haa! ! !. While it was out I tackled the interior, completing the lock swap. Finally ! It took two other FABO members explanations to get the idea that I...

The wheel covers shown above are offered as a set of four (4). They are OEM for 73-74 Dart, Dart Sport, and Coronet equipped with 14 inch wheels. No dents surface scratches or road/curb rash on any of them. If rim will hold a wheel cover, these will stay on the wheel. Best offer received by...

Thanks for the recommendation. Doing a double replacement; the ignition lock, which will match the keys I have for everything else on the car, and putting on an original Tuff wheel. I am keeping a log of what is going on with this car in "Member Restorations" area on FABO.

Getting bored sitting around. Speech therapy is needed and helpful, but it doesn't solve my need for getting something done on the Demon. The steering wheel came off a week ago and front seat came out this past week. The steering wheel was pulled in preparation for a new lock cylinder to be...

Thanks to jonno6464:thankyou: and Redfish :thankyou:(and Harbor Freight), the Pin is OUT . :thumbsup: Dripped the last precious few drops of KROIL (best penetrating oil I know of) I had, bought a full set of punches, add in my BFH and drove it :BangHead:toward toward the door glass. Thanks also...

Removed collar. pin is fully exposed. It appears to be rusted in place. Looks like its time to roll our a 3/16" bit with approximately an 8" shank.

I havne't been in a couple of years. I think ca. 110 cars is par for the event,

Okie dokie, you guys. How does one remove said steering wheel lock plate. I have tried all manner of violent means to remove the roll pin that secures this plate to the column. Don't care about saving the 3/16-inch diameter roll pin. I can get another at Lowe's.

Thanks for the recovery wishes.

Car show Rain or Shine at First Baptist Church Parking Lot, 543 Ockley Street, Shreveport, LA , March 28, 2020 8:00 AM to 3:30 PM. Discounts if registered before 3/14/2020. Food, Prizes, Family Friendly. Check out web page, particularly if severe weather (e. g, a storm like Katrina) is...

Sidelined for the near future. I had brain surgery towards the end of December. I am just able to get around on my own. Naturally, no driving while taking opiods. Have thoroughly researched how to change out the ignition lock cylinder in the car and made out an exhaustive 'to do' list on...

I am looking for the two Stainless Steel angles that go at the base of the windshield. Also looking for the rear window trim. Specifically seek the 2-piece trim that goes across the lower edge of the rear window. The sedans and coupe's use different glass and trim than the sportroof cars do...

I"ll look for something like Noico. DynaMat seems excessively priced. This may be the way to go with this.

I didn't know there was an Amazon product for this function. Noise in't much of an issue for me, but heat is. Noise abatement is a sweetener on this type of product. Thanks for your opinions and reponse to my inquiry, both are helpful to me.

I have a 72 Demon, that I am putting the finishing touches on. It was once a white, /6, factory A/C car. I want to be able to use the factory A/C controls on a reliable system to cool the car. I have changed both the body color and interior colors to Grabber Blue and black with B&W...

Got it in the garage just in time to miss the first frost of the season. I'll start be removing the front bench seat, so it can be re-upholstered. Since this is the first time I have had everything under one roof, every day I tackle a box is like Christmas. And the surplus is really showing up...