I have a set of the old 68 Style Dodge hubcaps. They are not perfect. They have several dings and dents (see pics) They would be fine on a street driver or for parts. Located in Savannah, GA looking to get $60 plus the ride.
This is a brand new set of Mickey Thompson Racing Inner Tubes ordered a couple of years ago from Summit Racing. One is still in the original packaging, one has been opened but never installed. The MT part number is 9555. Size is 11.50-15. Located in Savannah, GA.
Original cost was over $75 each...
This is my last set of 8 3/4 spring seats (shock plates) for an 8 3/4 A body, B body or 71-74 E body.
They have been sandblasted, primed and painted with gloss black paint. The threads are in good shape and the nuts turn freely. Located in Savannah GA I need to get $85 shipped in the US. Thanks...
This is a nice used pair of the rear shock plates that hold the rear axle to the leaf springs. They will work on A b and E body cars with 8 3/4 rears. They have been sandblasted and painted black. The shock nuts turn freely by hand with no damage to the threads. There is some minor pitting but...
This is a used (NOT rebuilt) manual steering box from a 73 Duster. It has a new pitman arm for 73-76 A body. If you remove that and use a different arm, the box will fit 64-72 A body, 66-70 B body and 70-74 E body.
This part was carefully cleaned and painted. It moves freely with very little...
This is a nice used set of the upper studs that hold the rear shocks in place on a 67-76 Mopar A body. They are hard to get, a pain in the *** to remove and just about impossible to find when you need them. Located in Savannah, I'd like to get $33 shipped.
This is a set of used 6 cylinder torsion bars for a 64-76 A body. Most drag racers know that old worn out 6 cylinder bars work best on a race car and these are from a 68. They were stripped with chemical paint remover then cleaned on a wire wheel and painted gloss black. The numbers are 888 and...
This is a transmission crossmember for a 67-72 A body with any engine and an automatic or 4 speed transmission. It has been cleaned and painted. There is a used replacement rubber mount that has a lot of life left on it. Located in Savannah, GA asking $75 plus the ride.
64-76 6 Cylinder A body torsion bars $50 plus $25 shipping
I pulled these bars from the listing after an FABO member said he wanted them. The deal fell through so I relisted. I also lowered the price.
These bars have been chemically paint stripped, wire wheeled, and painted gloss black. Great...
This is a set of used torsion bar adjusters for a 67-76 A, 66-70 B, and 70-74 E body Mopars
They have been cleaned and wire wheeled and the bolts move freely in the threads.
$30 shipped from Savnnah, GA
I'm trying to get some cash for this weekend's MOB swap meet in Melbourne FL!
This is a set of used A body 6 cylinder torsion bars (fit 63-76). They are very desirable on race cars due to the low spring rate. They have been cleaned and painted. $75 plus $25 shipping!
I'm trying to raise some cash for the MOB swap meet in Melbourne, FL this weekend.
This is a used factory drag link for a 67-72 A body. It has been wire wheeled and painted with Cast Blast. The holes are tight and it is not bent. People used to think there was a difference between the v8 and...
I have a nice clean set of spring (shock) plates for 66-76 A body, 67-72 B body and 71-74 E Body with 8 3/4 or Dana 60 rear. They have been sandblasted, wire wheeled and painted. The threads are very good!
Located in Savannah, GA. Selling for $95 shipped in the US.
I was cleaning out the garage and found these 5 front hubs. They are mostly from 9 inch brakes (although there may be a 10 inch or two in there.) I can't tell them apart. They are dirty pulloffs, some need stud replacement. They should fit in the medium flat rate box for $15, so I can sell them...
I just got a $38 bounced check fee this morning with more bills on the way. If you look at my Ebay listings no reasonable offer will be turned down on any of those items and yes, I will sell them off ebay...
Mopar 8 3/4 rear brake backing plates & arms 11 by 2 1/2 CLEANED & PAINTED $100
So 've been trying to sell this ugly rusty greasy set of brake backing plates and I finally got around to sandblasting them. These parts will fit most 8 3/4 rears with big bolt pattern axles EXCEPT a bodies where the...
The brakes fit in a USPS medium flat rate box which ships to Canada for $48. However to be fair, I was offering them for $100 shipped in the US so I should deduct the cost I would have paid to ship to a US customer. The medium flat rate box IN the US ships for $14, so $48-$14=$34
I sold one set already and I have one more!
This is a set of 11 inch rear backing plates with the separator struts and parking brake arms. Located in Savannah, GA.
This setup will work on most big bolt pattern 8 3/4 rears including A body IF you are using aftermarket axles.(They will NOT work if...
I think I did a profile post by mistake.. this new system! sheezh!
Here's a copy:
Thanks Mike! I actually have two sets if you need more but my Paypal address is [email protected]. I can ship tomorrow