Search results for query: *

Hey all some more stuff I have leftover that I'm selling, so I can buy more!:D New in box, I think it fits all A bodies (It fits my 65) Please confirm PN! $20 & $7 shipping.

Hey all some more stuff I have leftover that I'm selling, so I can buy more!:D Tan console, pretty scratched but no cracks, chrome is just ok (see pics) I'll also include an ash tray. $25 & $10 shipping.

Hey all some more stuff I have leftover that I'm selling, so I can buy more!:D These look good but they do have some chips at the base (See pictures) $20 & $7 shipping.

Hey all some more stuff I have leftover that I'm selling, so I can buy more!:D A bit scratched up but solid! $20 & $10 shipping.

Hey all some more stuff I have leftover that I'm selling, so I can buy more!:D With a few minor tear but complete. The repo's are folded and stapled cardboard, the is the molded original one! $20 & $7 shipping.

Hey all some more stuff I have left over leftover stuff so I can buy more!:D Minor pitting, but too bad. $30 & $10 shipping.

Hey all Just selling some of my leftover stuff so I can buy more!:D I have the and console (sorry no cables), a bit scratched up and the chrome has some minor pitting the finish has some wearing, but there are no cracks (not bad for a driver). $60 plus $15 for shipping

MULLEN & CO CYLINDER HEADS WITH ROCKERS/INTAKE http://www.ebay.com/itm/RARE-MOPAR-SMALL-BLOCK-340-360-MULLEN-CO-CYLINDER-HEADS-WITH-ROCKERS-INTAKE-/172144772421?hash=item2814a0c545

I've been looking for a good street cam and I see that Hughes claims that this cam (SEH2428AL-11) http://www.hughesengines.com/Index/products.php?browse=category&level0=QS0gU21hbGwgQmxvY2sgIkxBIg==&level1=Q2Ftc2hhZnQ=&partid=30241 is a good street-able cam using a a stock converter and 3.55...

I have a stock 360 block that I'm bolting to a 904 trans and I'm looking into aftermarket TQ's. From what I understand (please correct me if I'm wrong) all SBM flex plates are the same (unbalanced and the needed balancing is on the converter). B&M has a PN 10239 for this application...

So I've been working on getting my 65 Barracuda up and running and of course I've run into several issue along the way, and the people on this great forum have really help me out so far. Now I have another one. What I have is a recently reworked over '73 340 with solid lift cam that I got...

Hey all, I've been trying to get my project car sorted out, one of the problems I'm having is that after I get the engine warmed up the idle will jump all over the place! Here's what I got: It's a 340 with J heads, RPM intake, an Edelbrock 750, and stock electronic ignition with a vacuum...

I'm looking for '64-65 Barracuda or Valiant (with hole for latch) hood, in good shape. I'd rather it be located in central NC or southern VA. I live in the Triad area of NC. Thanks

I have 73 cast crank 340 in my car, and have 360 block I'm thinking of using to build a stroker. My question is does the 340 use the same torque converter, or are they balanced differently than the 360?

...thread strictly factual so that we can have all the information here for everyone to see, and only post what you know, not what you think you know. **PLEASE THIS THREAD IS FOR COMPONENT INFORMATION ONLY, SO PLEASE DON'T CLUTTER IT WITH OPINIONS!!! Lets leave them for another thread...

I'm looking for a good performance oriented shop in the NC Triad area, and I came across this place. Anyone have any experience with them? http://drmoparshp1.wix.com/burlnc

I mounted late model LX rear wheel drive wheels on My '65 Barracuda with somewhat easy modifications, and I thought I'd post on FAO on what I did to make them work. Considering I got this set of 17X7” aluminum wheels off an 06' Charger for just $120 on craigslist I felt this was a very...

Hey All, I’m trying to install some door seals on my 65 Barracuda I’m not exactly sure of, could someone please post pictures on how they might go See pictures below: The 1st one is the lower inner door seal and I need to know how it meets up with the upper window seal. The 2nd...

I hook up my dash on my 65 Barracuda and the gauges and most of the lights aren’t working. My first thought was the voltage regular (VR), but the lower dash light (for the odometer) is working? My question is since that light still comes on so could the VR still be bad, or could it something...

I finally got the engine cranked the Barracuda I've be restoring, and even took it down the road for a test drive! When I got back and was pulling it back in the garage it stalled and before I could restart it I noticed some smoke coming out from under the hood. At first I thought it was some...

I tried to start the 340 I installed in my Barracuda, but the mechanical fuel pump is not pumping. I was able to pull fuel through the line (and fuel pump). This is a new pump I installed that I got cheap from Ebay so I'm not sure if it's any good. My question is possible to install it...

I saw these for sale, anyone got a picture of them installed Thanks

I'm in need of the chrome trim that goes over the rain gutters. I realy just need the front portion on both sides (the curved piece). It's for a Barracuda but l think any Dart or Valiant 2 door should work.

I trying to install the belt into the sleeve on my 65 Barracuda, but the the sleeves not very pliable so it's not going in. I tried a string, a screw driver and I even greased it up a bit, but it won't even budge! Any one know a trick to this?

As I've posted before, I'm putting my 65 Barracuda back together from the the boxes that it came in :D and I'm trying to finish up the interior trim. Could someone please post pictures of the lower door sills were the aluminum sill panel meets the seal (how far does this seal go up the sill?)...

Hello all, I'm been installing Addco sway bars on my 65 Barracuda. The rear went on without a problem but the front end links seem to be interfering with the lower ball joint (see pictures). I bought this as set on eBay a while back and I don't remember the Part# but they were supposed fit my...

I'm getting ready to install my windshield and rear window and I've been looking at some "how to" Youtube videos and noticed in one of them they installed the mylar strip in the seal before they installed the windshield it self in the car. It was beening done on a old VW rabbit converitble but...

I need to take my to get the exhaust installed on my car but it's not drivable. Anyone in the High Point or Thomasville area that might have a trailer I can borrow?:D

Is there a trick to getting the chrome trim around the rain gutter on a 65 Barracuda? I was able to get the rear (straight) part with not problem but the curved part doesn't look like it lines up so well. I came off very easy so I'm pretty sure I didn't get bent to much.

I was interested in their cast aluminum SB valve covers: http://ansenusa.com/product/mopar-340-no-name-black/ I believe these are the same as the Mopar Performace valve minus the "MP" name. I could not find a source for these so I contacted them directly Via email to find where I could buy...