Search results for query: *

Thanks for the advice. I think I'll fix up the wires then add a relay so the ignition switch doesn't melt again.

Hopefully a quick question. I am pulling apart my 73 Duster and found the multi connector from the ignition switch to the harness is burnt at the red ignition wire and the plastic connector is burnt and turned to dust when I pulled it apart. Looks like the guy's at the factory left a...

GM has re-introduced their EOS under a different part number #88862586. Here is a link to GM parts direct. http://www.gmpartsdirect.com/results.cfm?addtocart=1&addpartnumber=88862586&singlepart=1&partnumber=88862586

You may be thinking of the Hyper-Pak. Do a search on google for slant six hyper pak. It's a four barrel with long runners. Other than that there clifford or offy. Later

Unless your going to change them out do what I did. Remove upper control arms. Back off the adjusters all the way. Put a jack under the middle of your k-frame. Loosen all for bolts so its sitting on the jack. then Pull it all forward. The Torsion bars will stay in and everything else comes...

I'am using the spindles off of a 85 5th Ave. They are the same as the volare. I looked at this sight and decided to go with them due to their excellent work through of the differences http://www.bigblockdart.com/techpages/spindles.shtml