Search results for query: *

The two wires coming out of the distributor are a negative and postive. Which is positive and which is negative? I am purchasing: http://store.summitracing.com/partdetail.asp?part=SUM%2D850081&FROM=MG

Does the 26" width include the side brackets? Do you think it would fit in a 69 dart with a 1970s 360?

I smoked for thirty one years and quit 1 year 10 months ago and haven't looked back. The stuff upset my stomach for 10 minutes right after I took it twice a day but it works. It shut down the brain craving jitters. Once I quit and started exercising I got more energy. It is not a overnight...

See Link. My Dart is on page 1 http://www.bigalslist.com/pictures/2008pictures/bug062008/bug062008_1.htm

I just got my dart back from having the upper & lower control arm bushings, upper & lower ball joints and strut rod bushings put in. Wow what a difference. Spent $1,038 but still worth it. The mechanic algined it three times before he was satisfied and took great care not to damage my car. The...

Pull the rubber connector off the safety switch and test the switch with a electrical tester. I can't remember which two of the three pins you run the test through. Maybe someone else can chime in or take a look in the shop manual.

PST could not ship until Tuesday. Seem like they did not care. Called trustworthy NAPA. Mopart.com technical archives is saying lower ball joint is larger but does not mention upper as different?

I am calling PST to order a front end kit for my mechanic to replace all my bushings. I have large bolt pattern disc brakes, I think from a 1973 Dart. I dont need any sway bar bushings so my question is should I order the "front end kit" for a 1969 Dart less the stablizer link kit and...

I have finally got the shift points adjusted by shortening the upper rod at the carb but I have never had full throttle kickdown. My qustion is as I shorten or length the rod where it connects to the carb I am changing the travel at the transmission which is keeping the tranny lever from...

Great stories. I hope I never hit a bat eating a hot dog while it is chasing a turkey that is wearing a donald duck mask! I just bought a backup grille and headlight buckets from dart64gt.

I had a nice Sundy almost ruined. Me and the wife went to a cruise-in and then did a walk in a local park that goes in the wood to a cool bridge and water fall. on the way home a bird came out of no where and smacked the front end. I saw it out my driver side mirror rolling on the road. For the...

Seeing all these pictures is making me ill and terrified to pull my car out of the garage.

Prine, great info and thanks for the help. I am sure there some others that will also appreciate the pictures.

I bought new windsheild clips and a Y shaped trim removal tool to fix the stainless steel molding because it is pulling up where the two top halves overlap but now need some instruction so I don't trash my trim. Do the clips snap into the outer edge or the inner (glass) edge underneath the...

Try Firestone Collectables on E-bay. I know thay make the mid 60s b-body bumperette rumber which can be used on a late 60s Dart by cutting off the middle bolt.

I bought new trim at Carlisle and went to install it last night and non of the predrilled holes line up. I can clamp the new trim on and drill new holes in the car or mark the old holes through the back with a marker and drill new holes in the trim? Which way should I go? I hate to put extra...

The more I read and listen, the more I smell a rat at Chrysler and at the local police. I am not a fan of Dave Layson but I don't want to see anyone get railroaded by big money's use of the legal system. Did anyone read Layson's response. Laysons is saying all items with mopar penstar logos...

I do need to replace the bushings (upper & lower A-arm, strut rod). They are disinagrating and what is left is very cracked and split. Took a good look while the mechanic had it on the rack. There just isn't many places I trust. Thanks for the feedback that they are too high.

Toe in was 3/4" too much. All fixed but shop pointed out that my upper and lower a-arm bushings are dry rotted and while I was at it should replace torsion bar bushings. They gave me a quote of $730 parts and labor. Does that sound reasonable? They said it was 3 quarters of a day job and I could...

I called local mopar guru and found a great place that does nothing but suspensions (Dais Springs, Erie, Pa). They do everthing from RVs to all classic cars. It is going in Friday affternoon. I am not messing with my safety. Blowing a front tire does not sound like my kind of ride. Thank you...

Did not look at driver side front. Will tonight. May need alignment. The car has had only had 6000 miles since the front end was done and I haven't hit anything? Maybe the prior owners mechanic screwed up? If I do need to get it realigned I will have to call around. I am not leaving it anywhere...

The inner edge is like brand new. The middle looks very good but the outer two inches is already at half tread..

Prior owner converted car from /6 to 360 and upgraded torsion bars but now that the car has 6000 miles the outer 2" of tread is wearing way faster. I would like to lower the front about an inch. Is there a front ride height spec?

You have talent.

Take a look at this www.duncan-motor-sports.com I like it. It kind of acts like a slap stick. You just replace the shifter plate in the stock console shifter.

awesome car.

I have purchased from two fellow members and sent checks before receiving and had no problems. I may be "trusting" on this site but if a member has enough hits I am comfortable. This site is my Mopar life line!

It is nice to know I am not alone.

We are finally going to have a nice Pennsylvania weekend and the car is going to sit in the garage. My cheby friend's are I always rubbing it in on how easy it is for them to get parts and how cheap they are. This pisses me off to no end!!!!!

I ordered a used console automatic shifter on Ffriday 05/16/08 from Stephens and the guy seemed rushed and short on the phone, I explained my Dart will sit until I get the part. In short order, he said the shifter was $129. He did not want to here my deliema. I just e-mailed them and it may ship...