Search results for query: *

Rear shocks are sold,every thing else is still for sale. This is a great deal for the axles for a A body dart for street/strip Diff gears are for a 489 case mrmopartech .

For sale is a 8.75 rear end special for gears axle and shocks. First a set of 35 splinde axle made by strange with green bearings and studs 1/2 inch,these are the bolts in studs and should be replaced.Retail price is 480$US i will let them go for 225+Shipping A set of 8.75/489 case motive gear...

Up for sale is a 8 3/4 sure grip 3.55 diff with leaf springs and hangers and new u bolts,brake hardware,axle studs,drums,etc.This is a bolt in and go assembly.I have driven this charger that the diff was in and we installed a dana 60 with 4.10 gear set up to go with the 6 speed tranny.We are...

This fits all V8 engines from 73-86,and 2&4 barrel carbs,mrmopartech Divorced Choke Thermostat - Mopar, Carter 2bbl/4bbl

First off your mail box is full and needs to be cleared out. I am interested in the caps and bolts,depending on the condition of them,please send pics of them to me at : mrmopartech

the intake is for a 67-8-9 440HP motors for A=B-C cars,mrmopartech

This unit if it,s the cast iron unit is used on 65&66 10.5 flywheels for 361-383- 413- 426 engines on B&C cars,mrmopartech if it,s a alley unit,it,s a 65 B unit for 426.

2463413 is a bell housing for a 273 A body 9.5 clutch 3 speed tranny,mrmopartech Please post the other bell housing part number.MMT

For sale is a 5.250" march crank pulley for a big block with the dual pattern bolt holes.How is 40$ shipped to your door,mrmopartech PM me for further info and shipping,thanks

Need the part numer please,mrmopartech

Up for sale are a pair of HP manifolds for 68-69 383/440HP motors. Part numbers are: 2843992 left hand 68&69 B body Part number: 2806900 Right hand 67-8-69 B&C body 383/440. Numbers are from GTS catalog. Please contact me for shipping quotes and I am willing to help with shipping,too a...

Rad is listed as a 361-383 or a 426 hemi motor,as the part number is the same for all three engines,mrmopartech

Can you at least post the part number to ID the housing,mrmopartech

Post some pics of the rust on the ring gear please,mrmopartech

Do you have the wiring harness and the PC for it,flywheel,mrmopartech

sent you a PM,mrmopartech Send me your number asap

This is a brand new unit or it needs rebuilding,it,s a used unit pulled from a car???? We need pictures to be sure.Post pictures here so we can see,and the condition,mrmopartech

do you have a part number for it,mrmopartech

IF this is a 3861 carb,it,s for a 65 hemi and not a 70.Can you show us the tag to ID the tag and the number please.And a top veiw of the carb and the base bolt hole,mrmopartech

...buying,as would you.If you wish you can buy my car for close too 40 grand,just bring the money and ask no question,would you do it,there is no F#%*in way you are going to do it,unless you have a **** load of pictures and documents,and prove it,s a car worthy of that amount.At any time you can...

Ok,let me get this right,you want 18,500$ each or best offer as you have quoted,=37,000$ As much as some of the parts are good used parts,assuming nothing else is as bad as the broke block,the windowed block,and god knows what may be wrong with the alcohol/top fuel block and heads,and your...

For sale are two tranny,s I picked up just a couple of days ago. 1)small block 727 PK4028823 6061 0793 Feb/1978 2)small block 904 PK4028483 5726 1941 march /1977 Tranny,s are sold as cores only,your choise,125$each or 225$ for both. PM me for any details please,mrmopartech need this...

Can you post some pictures of the under side of the pistons to see if the dome on the piston is hollow or full? The block is a regular industrial block/commercial as you said,so what makes the price so high,is there some thing really special about it,other than the size.What other codes are...

Just sent out allot of PM to all you guys.I am alive,and well,sleeping with 1 eye open and the other closed,working crazy hours getting all the construction work done,7AM-6PM runs hard on a person,mrmopartech

your bell housing is a one year only 1968 340 4 speed bell housing,mrmopartech

Great that you have this for sale and it,s a rare unit,but I would repair it and include the shipping price for 2500$ or reduce the price for the repairs.Some minor welding,not a big deal,a heli coil kit and your done,we have less than a 100$,and include the complete bolt kit which is missing.So...

I will take the plate and spacer,mrmopartech

sent a PM to you,Mrmopartech

I read the add for the carb and it states:The mixture screws are seized in the body and have been tried to drill themoout and still in the body,it,s a 10$ carb for parts at best,mrmopartech

The L6 stands for december 1966,if this has been sitting for a bit,it needs a rebuild kit and also needs to be cleaner by a pro,to keep cadmium plating intact or restored.you also have some corrosion starting on the housing,and top,if you wish to sell it at a reduced price,PM me,as i found a...