Search results for query: *

hello, many thanks for that, im thinking of getting a x pipe fitted at some point just past my headers will fit one in there, its a real odd one espically the sooty carb.tis an odd one this

fuel guage has to be a matched ohmage as that of your sender in tank, my original one in dash was poo, i went autometer i think.another prob i had was the fuel pipe from sender in tank was a source of an earth from the electrical sender in tank,ie had to have a decent earth path, this had given...

shout if can help. rewired my 68 cuda from scratch, made a rough diagram of what i needed and made my own loom up,you gotta break it down into circuits and not look and the whole picture! basic voltmeter a must, plenty of help on here, regards nathan, wales uk

hello all, odd one here, had like a miss, would clear on higher rpm but still not pull clean, it was like several leads were breaking down and coming in at the same time or you losing ign for a second then getting back but know not ign as not misfiring, i swapped the leads anyway wondering any...

hello, cheers for reply, car going well, think the mixture screws moving bit with vibes,could be the bushings worn, know rebuid not expensive just wondering if there a better carb out there , ta, nathan

hello, did have quick nose thro posts. had my car back from garage, pal reakons my holley 750 vac sec worn, not staying in tune, it had a strip n rebuild at christmas, pal reakons a rorchecter? or carter as replacment, any opinions please? car a street, manual 4 speed,low comp motor with...

hello all, finally fitting my magnum force tubular uca along with flaming river box,poly lca bushes and ali strut rods.a pal of mine is doing this as he has ramp etc,is there a ball park setting for the upper arms just to get it rolling and to another pals to settup? car a manual four speed...

pal has offered me a head/cam combo, some flowed 915 heads with bigger valves and a 484 lift cam and followers said this should pick my comp up, whos guess what power itll make,bound to blow out some cobwebs! hi there, many thanks for the help, think this the way to go! tubular uca and flaming...

hi there, any news please?

pal has offered me a head/cam combo, some flowed 915 heads with bigger valves and a 484 lift cam and followers said this should pick my comp up, whos guess what power itll make,bound to blow out some cobwebs!

hello there and thankyou for all the input, really appreciated! trying to find somone over here who can work on iron heads leave alone somone who knows what they are doing seems to be as rare as rocking horse s@@t. im 50/50 on buying brand new ali heads so i know i got somthing that will work...

hello, what i have done is bought some closed chamber heads to rebuild for my car without even knowing what heads i had on there at the moment,what i was saying was i had just discovered they are open chamber 906 on there which i will be dumping in favour of the others once spruced up, sorry...

many thanks, would you go stainless valves or not? im going to take one of my heads off to do a static comp test and see what my bores are like,i have heard that i may have to pocket the pistons :D i dont want waaay too much compresstion where it becomes a mare to drive,just perk it up a little...

hello there, just looked, mine are 906 so with a bit of work these could be good and worth changing to a closed chamber

many thanks for the input, will check casting numbers in morning, the car going to be street,im told my shumacker headers only cope with 500hp so probobally not get full benefit from ally ones other than the weight loss and although not as easy to work with i reakon a well cleaned up set of iron...

hi there, will i know by head casting numbers?

hello, i have a chance on some heads, yeh they preetty scrap value stateside but not much happening here in uk, these worth the effort? my engine a 66 <65 casting> 440,ali inlet, shumacker headers,holley 750 carb.my plan was to wake her up a little with some kb pistons,keep my six pack rods and...

yes please! if you want to pm me i can give you my email address etc, many thanks for getting back!, nathan

A body aftermarket strut rods wanted.prefer ally,must be cool with shipping to uk, and paypal, cheers nathan.

hello, do you ship to uk and take paypal please? im after some strut rods and a pair of front bilstien shocks please, 68 barracuda, many thanks, nathan.

upgrading the suspention on my 68 cuda 440,have a budget to blow on the front then will hit the rearcar a streetcar,heres what i currently have on car as far as upgrades go...monroe shocks and hellwig sway bar,i have jusr ordered some tubular upper arms and a better steering box, a pair of lower...

we

hello, sorry for jumping in, i am in the same market looking to replace mine,already converted to disk from 73 dart so be looking for the larger ball joint are the double adjustable ones worth getting over the normal and its a toss up between magnum force and hotchkis are the hotchkis worth the...

hi, i like! nice work, you ship to uk please?

no

hello there, somone sent me a link of a company that does a A bod pistol grip to work with the original centre consol,they incorporate a dog leg bracket that bolts between hurst and pistol grip, any one tell me who they are? much appreciate, nathan.

There is a factory in Essex which makes the Tickle Me Elmo toys. The toy laughs when you tickle it under the arms. Well, Shelley is hired at The Tickle Me Elmo factory and she reports for her first day promptly at 8:00 am. The next day at 8:45 am there is a knock at the Personnel Manager's...

back from the paint shop sat, ben 10 green lol, 440ci 4 speed,not many here in uk!

and now to do interior!

getting colour