Search results for query: *

Found a post that says: PM = built at mound road plant 273 R = regular fuel 2849 - > 10k cal = Friday, May 16, 1969 0556 - Engine built what yr is my 273?? Interestingly and maybe it started in 69, the stamping doesn't follow previous year codes

Well interesting. ? = 64 ( first year of 273) A = 65 B = 66 C = 67 D = 68 E = 69 (last year for a 273) Was P the last letter before they started over?

The Dodge Dart Page | Facebook

I saw a set on face book. If I see it again I'll grab the link

Start at the beginning... Did the brakes work good at some time? What changed between then and now?

That proves the IGN 2 is not providing battery voltage to the coil plus during cranking. Why is the big question.

PM 273 Is most likely BM 273. 66 model year. Which is good, has modern intake bolt holes.

Without rereading the entire post .. Have you verified that you have cranking g voltage to the plus side of the coil during cranking? The IGN 1 is not active during cranking. And is a make before break type contact that gets power a spit second before the IGN 2 looses power. If no IGN 2...

Place holder for future photos if needed

67 A Body Heater controls have a Nyloc nut to remove the plate. Note the spring washer. 69-76 Truck Uses a metal spring clip with a keyway to remove the plate. 68 to 72 A Body Used a plastic clip. The pin replacement is the same for all 3 types. 68 up photos and procedure courtesy...

They are a type of locking nuts. You photo makes them look REALLY oval but they should be fine. You should be able to screw them on by hand a few turns till they hit the smashed (oval) part then it will take more force. They work like this type of lock nut. The dimple compresses the threads...

Look for part numbers on the intake manifold

A hit can tweak things. May be the tank was on the edge and a tweak put it over the edge.

What year do you think it is? Front of engine, drivers side C = 67 model year 273 = displacement 12-21 = December 21, 1966 engine build date

This suggests that IGN 2 is not able to provide the bypass it is designed to do. Can't say for sure but... 99% of grounded field (round back) alternators are coming from the rebuilders as a isolated field (square back) with one terminal internally grounded. They clip off the spade terminal but...

Please answer these questions. We can't help with a blindfold on

What car? What year? What modifications? Post a photo of back side of alternator and of the voltage regulator Everything worked as expected till you changed the alternator and voltage regulator. Now starting is acting like you do not have voltage from IGN 2 while cranking. Give us some...

Here is what I did... Wiper Pivot R&R and Zerk Install

Word of warning on the repo convert arm rest pads The spring metal tabs are made of a brittle metal. My first set when I pressed it into the slots one tab snapped off. (I can put the originals in and out all day long with no issues) ABC sent me a new set and I was super careful putting it in...

There was a guy recently giving away a 67 dart steering wheel and horn ring just pay shipping. He replied to so eone About 65.00 for shipping. It MAY have been legit, but seemed sketchy. I replied that if he had access to a printer I would send him a PDF prepaid mailing label. He never...

Black ones in the kit. I did not know anyone sold them separate from the black plastic strips, but good to know .

Have you looked on GTS registry? There are no official numbers that I know of but they have a break down of the cars in the registry by some options.

Here is my take... Material plus labor = total Labor to make one qt = labor to make 1 gallon. Let's assume labor is 100.00 Let's assume 1 qt of material is 100.00 100.00 + 100.00 = 200.00 Volume discount ! 75.00 per quart for a gallon of material 100.00 + (4* 75.00) = 400.00

It protects the IVR from grounding to the cir board. I made one from a milk carton but a playing card would work well too.

IVR4 Limiter List - rte It is a really good solid state IVR. It mimics the OEM electro mechanical functionality. Plus adds a ton of protections

I was looking at parts from a wrecked red 67 dart convertible The guy had 3 names and the first and middle were a couple letters off of an actor and the middle and the last also another actor. I made a post about it here on FABO a few weeks ago

And Dana for the win... Post #3 :rofl:

There is a bit of arbitrary enforcement of "rules" but it's not my forum so

Something I have noticed is the scammers are coming up with names that are a jumble of famous people LaBron James Alen Hale I'm thinking AI is generating a name