Found a post that says:
PM = built at mound road plant
273
R = regular fuel
2849 - > 10k cal = Friday, May 16, 1969
0556 - Engine built
what yr is my 273??
Interestingly and maybe it started in 69, the stamping doesn't follow previous year codes
Without rereading the entire post ..
Have you verified that you have cranking g voltage to the plus side of the coil during cranking?
The IGN 1 is not active during cranking. And is a make before break type contact that gets power a spit second before the IGN 2 looses power.
If no IGN 2...
67 A Body
Heater controls have a Nyloc nut to remove the plate. Note the spring washer.
69-76 Truck
Uses a metal spring clip with a keyway to remove the plate.
68 to 72 A Body
Used a plastic clip.
The pin replacement is the same for all 3 types.
68 up photos and procedure courtesy...
They are a type of locking nuts.
You photo makes them look REALLY oval but they should be fine.
You should be able to screw them on by hand a few turns till they hit the smashed (oval) part then it will take more force.
They work like this type of lock nut.
The dimple compresses the threads...
This suggests that IGN 2 is not able to provide the bypass it is designed to do.
Can't say for sure but...
99% of grounded field (round back) alternators are coming from the rebuilders as a isolated field (square back) with one terminal internally grounded. They clip off the spade terminal but...
What car?
What year?
What modifications?
Post a photo of back side of alternator and of the voltage regulator
Everything worked as expected till you changed the alternator and voltage regulator.
Now starting is acting like you do not have voltage from IGN 2 while cranking.
Give us some...
Word of warning on the repo convert arm rest pads
The spring metal tabs are made of a brittle metal.
My first set when I pressed it into the slots one tab snapped off. (I can put the originals in and out all day long with no issues)
ABC sent me a new set and I was super careful putting it in...
There was a guy recently giving away a 67 dart steering wheel and horn ring just pay shipping.
He replied to so eone About 65.00 for shipping.
It MAY have been legit, but seemed sketchy.
I replied that if he had access to a printer I would send him a PDF prepaid mailing label.
He never...
Here is my take...
Material plus labor = total
Labor to make one qt = labor to make 1 gallon.
Let's assume labor is 100.00
Let's assume 1 qt of material is 100.00
100.00 + 100.00 = 200.00
Volume discount !
75.00 per quart for a gallon of material
100.00 + (4* 75.00) = 400.00
I was looking at parts from a wrecked red 67 dart convertible
The guy had 3 names and the first and middle were a couple letters off of an actor and the middle and the last also another actor.
I made a post about it here on FABO a few weeks ago
Something I have noticed is the scammers are coming up with names that are a jumble of famous people
LaBron James
Alen Hale
I'm thinking AI is generating a name