Search results for query: *

Use good ones, and add a chain to the driver's side.

The '65-up 13" wheels will fit the 10" drum brakes. The '64 and earlier wheels won't due to a different center hub design. You can tell the difference between the two by the size if the slots between the rim and hub. Real thin slots work, wide slots don't. Factory Kelsey Hayes disc brakes need...

a

Sale pending

:welcome: from :canada:

If you're gonna buy a crank, get a 4" arm.

:welcome: from :canada:

Have you measured the current cylinder pressure? or Do you know the exact Scr? And do you know the camspecs? and what specifically is the complaint with the current combo? ---------------------------------------- Having been running my 367 on the street since 1999, in my 68 Barracuda at 3650...

I had forgotten about them! I thought they were out of business. Here they bees. https://www.steerandgear.com/

The heck. Rev it up and dump the clutch. lol

The automatic has about a 2.2 ratio of torque multiplication through the convertor. You won't have that with the TKX. Tom

10" drums and 13" wheels were standard on V8 '66 A-bodies, including four barrel cars.

Currently $660 for a modern upgrade from Borgeson, $750 and up to get your original rebuilt or upgraded by Firm Feel or Steer&Gear. Parts store replacements are dubious at best. Quality costs a bit more than your $400 starting point.

Too many factors to decide to swap in a TKX such as do you wanna shift gears, do you have budget for a TKX swap, are you gonna modify the trans tunnel to get the TKX to fit? A 323 gear, well built 340, and matched torque converter should be a stout runner. Now, a 727 has around a 2.40:1...

Yes sir!

Thanks! I ended up finding a very nice one a few weeks ago. I appreciate it though.

PM was sent.

Sneaky Pete - going to have to remember that guy. I am going to pressure wash the engine and add the black light dye to the oil. After a couple days see if it is or isn't the seal. Fortunately the radiator was the over heating culprit and I am pretty sure I have a vacuum leak causing a loss...

Very informative. I might try this—still deciding. Thanks so much.

Will these fit a 72 Demon..?

Asking $350 Plus shipping from 15642 Can Also Bring to Carlisle this week. (7/12-7/13) Good, Clean, Running Carb, reset to factory Specs. - 51 Primary Jet. - 6.5"Hg Power Valve. Carb ran fine on a stock Slant 6 with no other mods. , I just went a different route for my project. Carb is...

Do you have part numbers? I have two sets.

Steer and Gear

How is the engine wiring harness? How much with shipping to 92881?

Looks like a Grandma, hit, but still a Grandma.

I think he's offering you to spindles and the bolts which would be a crazy good deal shipped

Who exactly is spending your money for you? Keep the 3.23’s and go at least 2800 on the stall and you’ll love it. I hope you can drive a stick like Ronnie Sox if you think you can be competitive stop light to stop light with all these modern muscle/super cars out there with their 8 speed...

I have lots of play in steering, have been advised to get a new one. Want to stay in the 400.00 range for one. Adjustments on the present one have been done, time for new. Who would you advise me to buy from, I have power steering. Fits a 68 barracuda...TIA..

So true, I bet the HF and the EVO are made at the same facility.

Looks like it’s normally a ~$900 ish winch now. Regardless, Warn is just another US company whose CEO has put profits ahead of everything else. I’d rather buy HF and know exactly where my money is going than give it to the douchebag that decided to offshore a US company. Those guys are the...