As the title says. The cast iron water pump small blocks (up to 69) are not the same as later 70 and LA small blocks. I'm looking for a 3 groove crank pulley for an AC small block.
PM me with what you have.
Looking for an alternator bracket with AC (if it makes a difference) for a '65 273. I believe this is the one with the hole in it for the dipstick.
PM me if you have anything. Thanks FABO!
Almost new Powermaster dual groove, square back, 90 amp 1 wire alternator. Works perfectly.
$150 shipped to the continental 48.
PayPal to [email protected]. Ships immediately with UPS tracking.
1968 “742” case diff with Eaton Tru Trac installed. 1350 yoke. Installed new bearings and seal when I did the diff install. Case and gears came from a low mileage C body. Gears are quiet and smooth. Great gear (2.94) for those applications that like driving in other lanes beside the right…...
Looking for section of frame rail and upper control arm mount. This can be either side. Hopefully in the eastern NC area. PM me if you have something.
This can come from any 2 or 4 door 68-76. A body.
Brand new Dr Diff 3.55 gear set. 10 spline for 742. 200 shipped inside the continental us. PayPal via f and f or pay the 3%. Shipped UPS immediately.
PM if interested.
Does anyone have first hand experience with roof rail weatherstripping on a 67-72 Dart? I installed Steele Rubber products parts and the fit the body fine. The issue is the section that accepts the quarter glass is slightly too narrow. The glass cannot be rolled up without snagging the outer...
Looking for pulley only or complete pump with pulley from any cast iron water pump 273/318/340. Must be Saginaw style pump (pressure line in the back)
PM me with anything you may have.
Those using a Pro Flow 4, did you require a drop base to clear the hood? I've been using a 70-71 stock 340 unit, but looking for a little more air flow.
A body Mopar 4 Speed Package:
Brewers built 23 Spline, Cast Iron Case, 3.09 1st, 1:1 4th, 4.35 Bearing Retainer
Passon Rebuilt Hurst Shifter, Linkage and Operating Levers.
Used 23 Spline McCloud Dual Disc Clutch and Throwout Bearing
Trans is excellent along with shifter and rods. Clutch...
Set of stock strut rods. Straight, phosphate coated. Comes with Moog bushing set in excellent condition.
$75 shipped to the lower 48.
First one to PayPal to:
[email protected]***Add 3% if friends and family isn’t an option***
Ships immediately
Set of 11/16” tie rods. Assembled, Moog toe rod ends and QA1 sleeves. Joints are tight.
$80 shipped to the lower 48
First one to PayPal to:
[email protected]***Add 3% if friends and family isn’t an option***
Ships immediately
1970 Dart, 2 door, original FC7. Has fender, dash and door tags in tact. Originally a slant 6 with ac, power steering and manual drums.
Rear springs moved in 3" and mini tubbed. A narrowed 8.75" axle with a 741 center section and 2.76 gear with open differential. Rear is large bolt pattern with...
Brand new 18x9 Bullet style wheel for sale. 5x4.5 bolt circle, 6.00" backspace. Used for mock up only.
Located in 28443 or can ship for extra cost.
$25.00
Gauging interest. 70 Dart roller. New AMD quarters and fenders. Mini tubbed with 8 3/4 axle. New weld wheels and slicks.
Wilmington NC area. Around 3500.
Here is a package that anyone using any combination of original equipment style brakes can use.
We include modern carbon kevlar lined pads and shoes along with stainless braided PTFE brake hoses and high quality DOT 4 brake fluid. More information and link to purchase on the site.
Brake Parts...