Search results for query: *

  1. justinp61

    NHRA got their wish in factory X class

    I'm sure GM will throw a bunch of money at the nhra to make it happen.
  2. justinp61

    NHRA got their wish in factory X class

    Pawuk won FSS.
  3. justinp61

    New setup- 340 based 416, 360 based 387, or 360 based 408?

    I’d do a 4” build and sell the 3.79” crank. Another bonus of 2.100” or 2.000” rod journals is bearing selection in addition to a better selection of rods.
  4. justinp61

    6.1 or 6.4?

    My 14 1500 Ram with a 5.7 has an 8 speed transmission.
  5. justinp61

    6.1 or 6.4?

    The Dart is street/strip. Nothing wrong with it, would just like to build a decent cruiser with air that runs well. Most likely I’ll rebuild the engine, add a cam and do whatever mods needed to make it live a long life.
  6. justinp61

    6.1 or 6.4?

    I’m going to sell my Dart and buy a 77-84 swb Dodge truck. The plan is to swap to a Gen 3 Hemi and 8 speed transmission. 6.1 or SRT 6.4, and why? Thanks.
  7. justinp61

    340 or 408?

    No, I didn’t expect a 10.00 car to be a daily driver. It’s not cantankerous, don’t foul plugs and doesn’t get hot. I built it just like I’ve built all of my engines. Yes, I did pay someone to port the heads and do the machine work. I guess that makes me a check writer, LOL.
  8. justinp61

    340 or 408?

    Okay. I too ran 4.57’s behind a 340, it’s not a earth shattering idea. You’re the internet winner. Please carry on.
  9. justinp61

    340 or 408?

    Have you ever sought counseling? I’m sure you’re an intelligent guy, you just think your way is the only way. I do write checks for head porting and machine work, not for assembly. You apparently have the equipment to do it, congrats. Nothing wrong with short stroke engines, I’ve built...
  10. justinp61

    340 or 408?

    Actually I haven’t learned from forums like this. I have however learned a lot talking to Dwayne Porter (PRH) Brett Miller and years ago Ryan Johnson. Yes, I’ve had help and have never denied it. I was told years ago, if you want to learn seek advice from people smarter than you. Please show...
  11. justinp61

    340 or 408?

    Haha, my feelings are far from hurt. I’ve posted my work, you, not so much. I’ve never claimed to be a machinist, don’t have the equipment. You’re the winner, does that make you feel better?
  12. justinp61

    340 or 408?

    I don’t need you to build my engines, I build my own. Please show your work.
  13. justinp61

    340 or 408?

    I won’t argue with math, just the application. Why would I write checks to idiots? I respect the opinions of a few members here, you are not one of them. Please carry on keyboard expert.
  14. justinp61

    340 or 408?

    I didn’t tell him he shouldn't run his 4.56 or build a 340. It’s internet experts like you who tell everyone what they shouldn’t do. There are more than one way to skin a cat. It’s like grade school math, show your work. I’ve posted several examples of mine. All you’ve done is thump your chest...
  15. justinp61

    340 or 408?

    Not calling you or anyone else a liar, your stuff probably runs hard. The opinion that it’s my way or the highway is what sticks in my craw. You are right, I’m not a engine builder. I do build all of my stuff, engines, transmissions and fabrication. My hat is off to you sir.
  16. justinp61

    340 or 408?

    I have no problem with short stroke engines, only internet experts.
  17. justinp61

    340 or 408?

    What do you have and what has it run? Weight? I’ll leave the dick measuring to internet experts like you.
  18. justinp61

    340 or 408?

    I’m looking for a dump truck to put my engine in. That’s all any small block with a stroke over 3.31” is good for. LOL
  19. justinp61

    340 or 408?

    Cool. What did your 4” engines run and at what weight? Fuel?
  20. justinp61

    340 or 408?

    It is a street car. Yes, it has Indy heads. My Edelbrock headed 408 ran 6.57 @ 104 with a flat solid on pump 93 at 3240# with Edelbrock heads. It got driven on the street a lot. I love 340’s and have one, it ran 7.24 @ 94 and 11.60 @ 116 with a flat hydraulic cam and Edelbrock heads, 3240# on...
  21. justinp61

    340 or 408?

    Define a tractor engine? My 434 has turned 7800. Tractor engine?
  22. justinp61

    340 or 408?

    Big difference.
  23. justinp61

    340 or 408?

    Will a 340 do it on 93 pump gas at 3290#?
  24. justinp61

    340 or 408?

    Okay, what would it take to build a stock stroke 340 to pull that weight 135, on pump 93?
  25. justinp61

    340 or 408?

    28”.
  26. justinp61

    340 or 408?

    How many rpm’s would I have to turn a pump gas 340 to run 10.00 @ 135 in my 3290# Dart.
  27. justinp61

    Need advice on my Holley DP 650

    You can change the needle and seat assembly without removing the bowl.
  28. justinp61

    Roller cam and lifters question

    I wonder if he's welding the oil hole for the pushrods. I don't think I'd want any welding done on the body.
  29. justinp61

    Roller cam and lifters question

    Did he explain the "excess windage" comment? Do the Bamm's have a passage axle oiling?
  30. justinp61

    Hemi challenge

    I wish I knew someone who was there, I'd love to have a Hemi Challenge cap. First pair in the box now.
Back
Top