needs some help, 8-3/4, rear drums, everything new.
the drums refuse to rotate when I tighten the wheel down. if I loose the lugs slightly, it will rotate, but when I tighten them down, movement / rotation stops. It does it on both sides the same with the wheel tire off (so it is not a tire...
I might be new to the engine electrical management for the Gen III into out A body's, but who and what is the best to use? I believe I have read that the OEM harness that came with the engine has too many circuits that if left unconnected can confuse the computer.
for clarity, I am...
looking to buy a good set of 3:55 ring / pinion for a 742 case. We have a set of 3:91 to trade if interested. Willing to trade or buy trade entire pumkin (only 489 or 742 case w/ sure grip) if interested. Going to Butch Leal / Tulare Ca.....looking for more top end I guess.
looking for a section of the firewall. Approx. 12"-14" radius around the trans tunnel including portion back to the floor pan seam.
need to fill this hole. Would like an extra 3"-4" of firewall around the opening pictured.
slight surface rust OK
pics and price (including shipping to NW Ohio...
I need a nice, rust free (surface only ok) unmolested upper radiator support from 67-76 A body. A rough cut to remove is A-OK, I prefer to remove the spot welds myself. The lower portion can me bent, I will not be using it.
e-mail or text pictures and price to
Denny
[email protected]...
looking for a fresh 440 (.030 over A-OK), prefer aluminum heads for a street / pump gas build within easy driving range of Findlay, Ohio. H beam rods a plus.
let me know what you have and price.
Denny
[email protected]
304-939-0097
just need to verify heater hose routing with the OEM vacuum operated water shut off valve.
currently I have from water pump to right side (looking from front of engine) heater fitting.....out the left side , thru the shut off valve with the vacuum port pointed to forward ....then to the intake...
speedo is off about 5mph........... @35 it reads 40, @ 55mph it reads 61.
currently I have a 38 tooth pinion which is what Brewers chart shows for a 27" tall tire (275 / 60 / 15) with a 3:91. I verified it has 3.91's and installed the (blue) 38 tooth speedo pinion myself.
I'm thinking a 39 or...
extremely nice OEM / bayonet style A-body shifter. I bought it with some other parts so what you see is what you get.
$275 to your door (continental USA only)
working on 72 Duster.
what does this adjustment do? I'm guessing it makes the coil / clock spring in the regulator tighter or softer to allow for easier window crank assist, but do not know. Hate to experiment on a finished ride.
Thank you in advance for any input
looking for a small block bellhousing to use in mock-up with my 3-speed cases.
please price with shipping to
Bowling Green, OH 43402
feel free to text or e-mail pics and price to...
[email protected]
304-939-0097
Thanks,
Denny
looking for the support brace from the front /center K -frame to the lower radiator support. must fit 72 Duster.
text or e-mail pictures and price including shipping to Bowling Green, OH 43402 to...
[email protected]
304-939-0097
Thanks,
Denny
looking for help.....as I get 10 minutes or so into a normal drive, the pedal starts feeling like something is sticking somewhere in the pedal / linkage. If I disconnect the linkage, everything independently moves perfect. It appears as the drive line warms up, it starts to creak/ groan and...
need the engine brackets for 273 / 318 biscuit style mounts.
text or e-mail photos and price shipped to NW Ohio 43402
Denny
304-939-0097
[email protected]
in need of 90 degree oil filter adapter assembly for small block.
please PM, e-mail or text price w/ shipping to 43402 (NW Ohio) and picture to ....
[email protected]
304-939-0097
Thanks
Denny
TTi #61HCA-R2C4 headers. test fit only, customer has starter on passenger side and these are for starter on drivers side. $867 list....sale $649 plus flat rate shipping of $50 anywhere in lower 48 (with shipping to Canada available for additional charge).
1-3/4" primaries with ceramic coating...
HDK now offers its latest version chromoly tubular UCA assemblies with built in caster increase for the 73 and up (disc brake conversion) spindle. This same UCA is used with the HDK coil over only conversion.
Install the control arm with the supplied aluminum spacers on each side of the...
this spindle has two R's stamped into the face.....but the caliper brackets mount holes would be on the front if mounted on the right / passenger side.
Please school me. Is this a R or L spindle?
What is a good plug to start with for a 408?....10:1 compression. Lumpy (don't know specs) hydraulic cam.
Might be over carburated....thinking 750 cm Eldelbrock.
Thanks in advance for any input.
Denny
Hi Guys,
Can I get your vote?....ends tonight. taking the top 3...giddy-up!
for my nephew ....Travis Philo.
Eldoras Governors Reign winged sprint car race is an invite only....Travis is maybe 100 votes short of the top 3 in the fan vote to get in.
Fan Vote: Governors Reign at Eldora Speedway...
platic bezel for the glove box latch. for a 72 Duster lid, but I would guess any Duster like glove box lid is the same.....any color.
ship to NW Ohio 43402
Thanks,
Denny