Search results for query: *

I have a nice 383/400 Holley street doninator intake for a low deck. Threads are all good although looks like a bolt was cut off on the EGR pad in back which is plugged as normal. No porting on runners. Nice vintage intake with great street or strip performance and it accepts the Thermoquad...

I have a nice D/C style big block K frame with mounts. Bottom is nice and the welds look good . Prefer pickup or meet up. Asking $350.00 with mounts, $300.00 with out mounts.

Pm sent on head gaskets/ valve covers

pm sent

I went through the whole cam walk dilemma went I was turning crazy rpms also. Put an aluminum thrust button from a single bolt big block cam on it and my oil pump gear wear and timing related meltdowns went away.

Have a nice 70 one that was originally purple now light green weathered patina. $150.00 at 49055 in Michigan.

Pm sent.

@JedlEG is looking for them

Have a nice complete 727 trans for a 67 383 in an A/B/C with a four barrel. Case number 2801543. Had a guy looking for a good core so I dug this out and pulled the pan and valve to check it out. Air checks good, would be good core for a 67 big block A-body resto. $250.00 picked up from 49055.

Have a nice clean offy low deck intake. Does have one bolt broken off in the choke well but other than that nice clean intake. Port matched to standard felpro gasket. Asking $185.00 plus actual shipping.

Rockers are pending.

Have a nice set of 273 adjustable rockers and pushrods as pulled. Gave them a quick bath to check the condition of shafts and rockers and they all look good. Stock 7.5 inch overall push rods. Shaft are grooved and in nice shape. Asking $265.00 shipped East of the Rockies and $275.00 west of the...

Pm sent on the rough one.

This is what my parts engine looked like. Not sure what you need different?

Pm sent on number 7.

Pm sent.

Pm sent

Pm sent.

Nope. In typical Mopar fashion ,three different pumps with three different bracket sets for three different engine families.

I went ahead and sent my 69 top plate so he should be able to make a nice template to sit on top and drill the holes through. Looks like he has a good start on making up the hard to find parts for these . Good luck with the project Dana.

Still free shipping on all.

Have some iron W2 rocker arms for sale Have 4 right and 4 left used thick body bushed intake rocker arms and 8 used non bushed econo exhausts that are clearanced for springs along with 3 nos econo exhausts. Asking $275.00 shipped for all.

Pm sent.

Spindles and hubs are pending.

Pm sent.

3/8x16 for the threaded ones.

Going to throw this out there as the all-star one is the one use. Got caught up in the same type of reading issues but it was as kerndog post shows it was not following on right side start right out zero then back and left side left out then zero and back. Also I just tape my steering wheel at...

Another long shot for someone. This block came up from Texas over fifteen years ago. Forgot I had it in the barn. 6/1/72 block vin looks like 2B474113.

You need pump and pulley?

The 70 cover is sold .