Well partially 3D printed anyway. My employer is now doing custom tube bending and cutting and we worked with TFS to build these custom headers for a show. That collector was actually printed in stainless using DMLS, Direct Metal Laser Sintering.
TBM is making front disks for our cars now. Popular option for you racers that want really lightweight setups.
65-72 A-body Mopar 10" Drum Spindle Medium Duty 4 Piston Front Brake K
Selling complete kit minus the spindles. This is the stage 2 kit with drilled/slotted/plated rotors and stainless hoses. Practically brand new with less than 100 miles on everything. The brakes work great, I just want something a little lighter and more track duty. Still on the car. I’ll remove...
Where do you find these things? They’re ugly as sin but with hubcaps like this and fender skirts it would round out my sleeper-ish look. Curb feelers for the final touch?
Just built by PTC. I’ve decided to go with a Circle-D converter I already installed and don’t want this one sitting around. This is a 9.5” Spragless unit setup to stall around 3500 RPM. It was spec’d for a turbo or nitrous high HP street/strip application. PTC said it would be good for 1000HP...
Derale 16759 Fan Controller. Used, complete and 100% operational.
Adjustable turn-on temperature from 150-240 degree farenheit
Turn-off temperature is preset at 10 degree farenheit below turn-on temperature
Push-in radiator probe
Heavy duty 40/60 amp relay
These are $65 new. I’ll take $40...
Nothing wrong with this WP. Has probably less than 500 miles on it. I swapped it out for the CVF model to more easily block off the bypass and heater hose ports.
$25 + Shipping. PayPal preferred.
Pics
———
These are off of my 65.
Excellent condition. Rebuilt with a PST kit a few years back. Includes torsion bar adjusters.
$60 + shipping. PayPal preferred.
This is a powerful little compact fan for tight spaces and 22" radiators. I had this on my Early A body. It's for a Chevy HHR application and measures 22.5" wide by 18" tall and is a little under 4" thick at the motor. I'm including the adjustable Derale 16759 Fan Controller with temp sensor...
Let’s have some fun measuring boost back pressure under different scenarios. Step 1, install pressure sensor:
1/4” OD copper tubing, compression fittings, weld bung, 100psi sensor wired and calibrated in TunerStudio.
Hi folks. I’m looking for a replacement for this driver’s side vent wing bracket that has a broken pivot pin. Mine is a 65 Valiant Signet but I believe they interchange with similar year Darts and Barracudas.
Parts are off of my rust free S. California 1965. I rebuilt the entire front end with a PST kit several years ago and they have low miles on them.
- K-Frame notched and boxed for Kevko or wide pan - SOLD
- Upper A Arms, small ball joint. SOLD
- Lower A Arms. $150 shipped
- Strut rods. SOLD
-...
AutoMeter Ultra-Lite Pro-Comp II Tachometer, 5” with memory recall. Works great. Just removed from my car.
$125 shipped to lower 48. PayPal preferred. Thanks
Anybody following this guy’s build? I follow him on Instagram. Amazing creativity and craftsmanship. Just ignore the power plant choice.
1964 Dodge Dart - Triple20 - CarBuff Network
This came in a 727 I bought off my buddy after he switched to a PG and I don’t think I’ll ever use it in my mostly street car. I believe it’s an older Tranzact valve body but there are no markings to confirm.
$350 shipped to lower 48.
PayPal preferred. Thanks
These are off of my 65.
Excellent condition. Rebuilt with a PST kit a few years back. Includes torsion bar adjusters.
$75 + shipping. PayPal preferred.
$200 + shipping without the pitman arm. PayPal preferred.
Ran this briefly on my 65 before swapping out the front suspension for rack and pinion. It’s practically brand new still as I rarely drive my car. Probably has less than 200 miles on it.
Was on my car until I swapped it out for the PST fast ratio box. This one should be the 24:1. Very clean and turns smoothly. No binding or slop.
$50 + shipping to lower 48.
13lbs in a 12” cube box from 33186 if you want to research shipping cost.
PayPal preferred. Thanks!
Used once for reaming out my spindles for large ball joints. Extremely sharp and easy to operate with a hand drill.
$50 shipped. PayPal preferred. Thank you.
Here's my write-up, review and lots of pics on this front suspension. I installed it over the summer on my 65 Valiant and have been putting plenty of street miles on it. Let's get the FAQs over with first.
Cost:
- A Body Mopar Street Kit (K-Frame, Upper and Lower Control Arms, Steering Arms)...
Bought one of these cheap off of Amazon after seeing good reviews about it on line. It won’t clear my BMW radiator but I’m considering buying a different rad just to fit these fans. Combined CFM is about 3450.
Sharing pics and dimensions here if other folks want to consider using it.
Around the...
It’s a long shot, but anyone looking for a 63-66 V8 front suspension setup in Miami, Florida? Local pickup only at the moment. I’d hate to ship it.
Selling my complete K-Frame (63-66) and suspension. Was completely rebuilt with a PST Super Graphite kit (about $400) about 9 years ago but has...
KYB Gas-a-Just shocks x 4.
These are practically brand new. Probably on my car for less than 100 miles. Perfect working order. Bushings are still mint. These should fit all A Bodies.
Part numbers are:
Rears - 554284
Fronts - 553317
$100 shipped.
Prefer PayPal but I’m flexible. Thanks!
I put these on my stock suspension street/strip 65 a few years ago. They are still in good shape. No leaks. The dents in the rears are from the back brace but do not interfere or degrade the shocks functionality in any way.
$100 for all 4 + shipping.
PayPal preferred but I’m flexible on...