Search results for query: *

my 70 dart went 10.o's ten teens with wilwood discs and drum brake in back had no problem stopping

not the right thread but car in my avatar has finally broke 11 second barrier thats another story

have an 8 3/4 backed braced with 35 spline moser axles that will go in next year and im watching the 8.25 safety is priority #1.another upgrade is disc brakes i have a LEEDS conversion kit going in it.

want to thank everybody for the thumbs up ill keep you posted on our quest for 12's

couple of pics of car which we affectionately call "Wimpy" she aint no beauty but you dont have to look good to go fast.some stuff i done to car new floor pan 1 piece and I rebuilt front suspension has cal tracks on all corners.It has a 700 dbl pumper rear is a 8.25

built a 69 Dart for my grandson 318 std bore with ross pistons zero decked 596 heads with 2.02/1.60 ferrera valves CNC ported by KG engines purple 508 cam hooker headers 1 5/8 10" 501 converter 904 trans 4500 stall 3.21 gears weighs 3150.we took to TNT at muncie dragway wearing stock set of...

If anybody is interested in this motor I will give away for FREE! I have taken pushrods and hold downs off motor I need the room Intake still for sale.

motor ran when pulled but needs a re gasket and freeze plugs needs tlc i also have a edelbrock 2176 intake intake does need cleaned available $200 for motor $150 for intake located in NW Ohio 45833

this a/c box is in nice condition pretty clean what I have in pics is all I have an asking price of $200 and I prefer if picked up.Location NW Ohio 45833

thanks i think i can squeeze a little more out of her on another note got a new engine i picked up 318 standard bore steel crank,rods,and forged pistons i wonder if I can make it run we'll see.

little update best so far on my combo 12.16 111 mph my combo on page 9 or 10

Sale pending on all A/C parts

here's an update on heater/ac box its intact plastic controls are in poor condition far left button plastic came apart cables are there wiring and vacuum lines not the best check pics $125 plus shipping or can be picked up from 45833

Radio Sold with bezel

im sorry didnt see your post i started to split up I sold idler bracket and a pressure line off compressor

plastic in good condition no breaks but chrome faded out I do not know if radio plays but nice condition plastic not broke $75 for all plus shipping from 45833

original a/c mostly complete what you see in picture car had 273 in it $100 must pick up from 45833

complete rearend with tires 2.94 gear $150 must pick up 45833

took about 3 weeks to regain my sense of smell and taste me and wife had it in september she got run down for 2 weeks I got a fever for about 2 days a little run down for a couple more then went about my normal activities

I have another 451 I got with a 73 Dart Sport 440 crank 440 rods Wiseco flat tops had 516 heads with big valves and a lot of port work motor on engine stand 10 yrs now was smoking when bought found 850 carb had 98 jets up front 82's in back go figure and a 50 cc pump I tore motor down had .040...

deals are out there car in my avatar 73 Duster i paid 1K for it i did not replace a panel on it worst thing on it was driver side floor pan some one did a crappy job of fixing and trunk has hole cause it had a fuel cell in it at one time ex dragcar i was told I have a lot of fun with it.

451 venolia dome pistons 400 rod with childs&alberts tool steel pins 426 crank .625 comp roller stage 6 ported heads timing locked at 35 degrees I have had this motor 20yrs now going in its 4th car 1st car tube chassis daytona with ported iron heads 9.80 142 mph best time 2nd car 70 cuda glass...

sensational alex harvey band and black oak arkansas just some of tunes I remember as a kid growing up also the who,stones,and about any 60's and 70's group.My granddaughters like to listen to Tommy Roe's Dizzy

picked up a 360 from a 1977 motor home for $175 got it home checked build date and was an 87 motor then found the rebuild tag from a company in MI that rebuilt it popped a valve cover looked brand new then took a head off no carbon ridge nice hone in it I got lucky stuck a .508 cam in it rpm...

i think you will be in 12's easily sounds like a nice combo

Has a 8 3/4 b body rearend in it 15x7 factory rims

best with old setup was 13.39 drove real nice on street nice sound to it i picked up this current 360 in trade 40 over flat tops no valve reliefs pistons in the hole looks to be stock replacement pistons i got some rpms off clearance rack at summit and called hughes engines for camshaft...

well finally have an update on my car with new combo 73 Duster 360 40 over pistons in the hole (got motor but with iron heads in a trade) eddie's rpm heads 63 cc bee hive springs stainless rockers Hughes solid cam 238/242 duration @50 .558/564 stl3842as-08 rpm intake 750 holley HP 1 5/8 hooker...