Search results for query: *

Thanks for the Edelbrock info. Also, thanks for the info on the 308 heads. I had head that before, but just wanted to double check. After about 4 hours of searching, found this link- http://www.mopar1.us/cylhead.html It has flow numbers and sources for many different Mopar heads. I guess...

They are NHRA Legal replacements for Stock/Super Stock

1. output- maximum, all out drag racing 2. 1979 LA 360- .060 over .423 cam, stock valves, shaft rockers, 9.1 to 1 advertised compression, stock carb...tries to spend the 1/4 between 4800-7000 rpm 3. no budget...just can't touch anything...no grinding or "messaging." That's cheatin' in my class...

I'm looking at the Edelbrock PN 60767 heads for my 360. I have a set of 596 heads that my machinist says are junk (bumps in the exhaust port...low flow). I was wondering if anyone has bought these Edelbrock heads and flowed them. Also, I have been told that the 308 head is much better than...

I haven't run it on J weight for a 1/4 mile, but it has slowed to 7.65-7.74 in the 1/8th. It was dead on just slow. It should run 7.40 like it did for my cousin 4 years ago.

Hello all! For sale is my 1978/9 Chrysler LeBaron. It runs in I/J/K/ and L/SA and passes inspection with no problems. 360 and 904 with new ATI converter and an extra older converter that's a little tighter. Extra intake and smaller cam to run J/K/ and L. New (5 races) rubber on the rear...

I found an old thread with some advice from Physixx on the rocker arms, but am still trying to find Sherman's phone number.

Hey guys, I need some help finding some new parts. I bought a '78 LeBaron and inherited some valvetrain problems. I need to purchase some Sherman lifters and a new set of OE style shaft mounted adjustable rocker arms in a 1.50 ratio. Does anyone know where I could find Allan Sherman's...

Is the Duster K-member like a Dart K-member (ie- have the bars that run from behind the front doors, through the tire arms, and into the K-member)? If so, I'd like to buy your K-member. If you could, Pm me with a picture. In need of this badly. Thanks, Wayne

Thanks everyone but I got a set.

This is my combo- 79 block 360 stock intake, rods, crank, pistons, heads, lifters, compression ratio, and carb .460 ish lift cam 4800 stall converter 5.12 gear 30 x 9 drag radials 904 trans 3730 pounds with me in it. best 1/4- 11.801 at 108.2 best 60'- 1.518

All messages have been replied to. Thank you. Just waiting on more correspondence.

That's exactly right. 273 adjustable rocker arms and special hydraulic lifters. I busted a bit of steel and chewed up both of my shafts and a couple of the rocker arms.

Here are some pictures of her and her 3700 pounds of glory....fat pig.

It's a stock 360 in a 79 Chrysler LeBaron. I race it in I,J, and K Stock and am having a difficult time finding stock adjustable rocker arms, shafts, springs, and spacers.

I need to purchase a set of stock adjustable rocker arms from someone. let me know what you have. Thank you! Wayne