Search results for query: *

I believe OER is owned by Classic Industries, which pretty much sums it up. Do a search for posts from @slantsixdan he was having quality ones made.

Self built headers into 3” x then straight out in front of tires. Tried it without mufflers, it was too sharp for regular driving. Added 4” round magnaflows. No problems hearing both pipes, the only stereo in this ride

Whoa~ got some much needed parts to install my int/exh, the special gaskets somewhere amongst. The studs came from badvert64:thankyou:, the aluminum came from an ebay seller, the aluminum is a tad narrow, but should work ok. Maybe tomorrow I can get busy installing all of these parts and make...

I have a complete SSBC kit. Description is in the photos. The kit is in original packaging, just opened for photos. Never been mounted. Some extremely light surface rust on one rotor will clean right up. $800 plus shipping from 49341. I do have pirate ship and there are two boxes. Almost $1200...

Welcome from another Canuck and Ontarian.:canada:

When the shop did my 5.9 with KB107s, they wanted a set of rings, rod bearings, flywheel and balancer.

I should not have to modify anything if the part is worth its weight! I also have another problem, the horn beeps when I turn the steering wheel. The black wire is not pinched or grounded. Something is out of spec. I put the old one back in and it works just fine except it won't cancel on...

I rebuilt my 727 trans last year and put in a trans go shift kit in it. I bought a 440 from a motor home with trans I switched the tail housing when I had it all apart. I also put a sidewinder shifter in it. So now I got the car all assembled and ready for a test ride. It moved forward about 4...

I need to try one of these. Oh and it's at an Irish Pub downtown. Cheers! Waterloo-Cedar Falls Area Foodies | Dylan Stull Your burger is certainly making the rounds today | Facebook We have a Russian Frisco burger w fries or chips for $9.99 as our lunch special today. Smash burger...

Welcome from Alberta Decent looking 67

Please mark the ad sold.

I believe this to be from a 64 dart V8 904. $30 shipped in the lower 48.

This is sitting in the discount pile at summit in Arlington as of 15:45CST. if anyone wants it’s. Just fyi.

Thats how most pickup trucks and vans are.

You may have a short tube vent bolt on a hump brake line. If the threads don't extend past the thickness of the housing enough the oil will flow down the hill up the vent bolt hole and out. Tube vent bolt threads are shorter then the hump style to keep them off the axle. See if the threads...

Add a good exhaust and tune and probably the best it's gonna be.

I'm looking at an "RV cam" probably a couple of steps over stock. Carbureted application.

Sold to me. Thanks!

Technically the most CR you can possibly run (Tune) for a given gas cam etc.. I imagine your cam choice is gonna be quite mild, can't really see much reason to go with a lot more cr than it has but if you over do it you can end up with a pinging mess especially in a truck that tows. Plus if you...

It will be loud and it sounds like ****! You'll only hear the left side-it sounds like an old 2 cylinder John Deere tractor. Are there any Vipers around your area. Listen to one with the side exhaust and one that had both pipes coming out the rear side by side. Then decide which one you can...

Thanks for that info, but then why are most crank triggers (aftermarket) 2 wire reluctance sensors?

So decided to try keeping it the way it is...so here is what has been replaced: new coil, ballast resistor, cap and rotor, pick up and reluctor wheel, wires and plugs. I have wired it correctly, only thing not replaced is the ecu. Still...no spark. Reminder...the motor is a 1972 318 ...

Ok, here goes. Please read, and understand my description, if you would. I have a container full of automatic transmission parts and pieces that i collected off cars at the U Pull It wrecking yards back in the 1970's and 1980's. Now my problem is that i never labeled the parts what cars...

I'm looking at a camper that's for sale there. I went and checked it out a couple of hours ago. Wife and I are debating whether to or not to go for it. Story is it's at a storage unit yard. Nobody has paid storage on it in at least 3 years and they're wanting to sell. The problem is with a...

Hey guys, if it is a 10-1 motor try a 528 purple shaft if you can find one and 3” exhaust you will definitely have everyone looking twice when you idle by had one in my duster

I went with the LA timing cover when I did the 5.9 magnum swap. I had good luck with my carter mechanical fuel pump, figured it would look more period correct. Fast forward a couple years and the alternator brackets I rigged up keep throwing belts, the power steering pump I've attemped to...