Search results for query: *

46RH to 46re case can it be used ?

Original Amp Gauge and Temp Gauge removed from 1972-1976 standard dash cluster assembly. Both gauge respond to a 12V signal, so I am assuming they both function as they should. $30ea or both for $50... plus shipping Marshalltown, IA 50158

Wanna come by your place to pick up that hood

1970 Dart 340 Swingers have "DART" and "Swinger" emblems. All others including slant 6 and 318 Swingers have a "Dodge" emblem.

That's an accident waiting to happen for me !

Not the cam I'd use in a heavy B body with a 3:23 gear, but if I WAS gonna use it, I'd do like RustyRatRod suggested

Fantastic A-bodies in the pics. Congrats to both of you for sharing, and actually driving them!

I used a 70 one on my duster with a LD340 and a street demon carb, its the only air cleaner I had that would clear the hood.

Intake center line. That's where the cam installs. The lobe separation is 109. If that was mine, I would install it down around 102, or even 100, which would be 9 degrees advanced. When Lunati gives an installed place, in this case 107, which is 2 degrees advanced, they aren't assuming someone...

Same one fits under closed hood after playing with base pic 3 & 4

Back in the 1970's with a solid lifter camshaft I checked/adjusted valve clearance on the .580 lift/312 duration Isky camshaft I had installed in my 273 bracket racer. I would like to find a similar valve cover gasket that I used back then that I glued to the valve cover and used over and over...

I am sure liking the way that looks, it may be the flat color and black too? Either way, keep on keeping on!

Educate me on changing a cam's ICL, please. What does it do/change?

Changed the oil for the first time in my wife's Jeep, warrantee finally ran out. Did not have a filter wrench to fit it, so a trip to the parts store. Owners manual said it took 4.5 qts, liars it took 5.5 so another trip to the parts store. She is happy, it cost her less than the dealership...

That’s a good idea, I’ll check that. The air draw through the radiator should increase with higher engine temps (after it’s warmed up) and higher RPM, correct?

Thanks @DionR.

Link to each day so far is here, probably be there for all days. https://www.motortrend.com/events/hot-rod-drag-week-2024-results/

2-speed wiper wiring harness off 1970 dart, I'm sure it will fit others. Really good shape, no cut wires. $25 plus shipping from 40165. Thanks

Any spacer ?

I'd install that cam at least down to 103 ICL and might go as far as 100.

Is there a link to the current standings in each class somewhere?

I use Ninja Fuel Systems on ebay. They are in Georgia and all their kits are ethanol friendly.

Update: Now the coolant temperature gauge is working but takes a long time to make it over up to the normal operating range (like half an hour of driving). The fuel gauge came back up from empty to showing a quarter tank full. Don't know if either gauge is measuring things accurately or not.

Maybe I'm jaded, working on other people's stuff, just leaves no time for my junk. But there is allways something cool in my shop. Like this all aluminum HEMI, will be a 528 cube pump gas street car deal. I guess I get more enjoyment now by doing cool stuff for other people.

It's definitely something new that I like. Not sure tgat I'll go in search of them but I won't pass any up

This is my 1970 340 Swinger trunk lid and emblems.

I don't even remember seeing the short filter back in the 1960's or 1970's. With the 90 degree adaptor, no need for a short filter anyway.

Change the oil and oil filter today