Search results for query: *

I think I'll just get it close for the rest of the year so the kids can go for a ride and over the winter swap the carb out with the Sniper 2 or something else.

No idea on that part. I plan on pulling the motor and trans out over the winter and going thru both since they both leak oil.

It runs fairly well other than being rich, idle is really bad burns your eyes out in a matter of minutes even with the garage doors open. Hopefully just a good cleaning and readjustment helps it out.

I'm just looking for a good reliable setup.

Measuring the top venturi looks like they measure the 1.28"

Cam on receipts is a edelbrock performer RPM. Edelbrock 7177 Edelbrock Performer RPM Cam and Lifter Kits | Summit Racing No idea on the part number for the carb. It has a 6 on the top and the throttle blades are marked 1.69 I'm not to attached to the carb and am considering swapping over to...

Carb is going back together today. The air bleeds are not threaded and yes the quality control is terrible. found metal chips and burrs hang all over inside along with the easy idle not even drilled out. Not sure on the history of the carb since I just got the car and am going over it now.

The carb doesn't appear to have adjustable air bleeds, and the power valve in it looks like a 56 or 65 depending on how you read the numbers. The 65 power valve is the replacement in the kit. Would i be better off with a different carb??

Looking thru the books its looking like 9 to 9.5 to 1. The short block is the lower compression one but I am not positive what all has been done thru the years also.

Working on the new to me Dart with a 360, what I have for receipts amounts to a 4876907 short block. Edelbrock RPM air gap manifold, Performer RPM aluminum heads, TTI headers, and a demon 750 vacuum secondary carb. Looking at the plugs they appear to be either too cold of a plug or running to...

Small block crate short block, Edelbrock Performer RPM aluminum heads, Speed Demon carb. Dyno sheets say 420HP. Hughes 727 trans, Denny's driveshaft, 8 3/4 diff with 3.55. Its been sitting awhile so it will need new seals an gaskets but that's what I built a heated garage for.

Yes, 1970. Been a long time since I've had a car older than me.

Picked up this gem as a project and am looking forward to lots of fun smoking tires and pissing off neighbors. Needs some interior work and other minor fixes but should be fun.