Search results for query: *

If you had access to a 5-gas analyzer, the NOx would tell you the ultimate answer. If you were experiencing knock, or vapor lock before, decide for yourself if it reduced carb temps.

I have a tractor with a bucket, and a snow-blower, the rest can be done with flat coal-shovel.

This is a OEM 1971 383 Throttle Cable/Kickdown Bracket. It is Original, not a china knockoff. It is in good condition, but could use a cleanup. It will also work on the 400ci, and may work on other years and engines. $35.00. Local pickup, or buyer pays shipping.

I’m going to sell my Dart and buy a 77-84 swb Dodge truck. The plan is to swap to a Gen 3 Hemi and 8 speed transmission. 6.1 or SRT 6.4, and why? Thanks.

As soon as this hurricane stops soaking us with rain......I'm gonna go out to the garage and check my Tractor to see if I need to go get diesel to plow snow. If we had more snow, I'd get one of those blowers like @68gtxman has. My neck is broke by the time I do our road and 5 neighbors drives...

If it was any tighter, I could not install it and that's with aligned hone and decking. Mopars rock!!!

Moved it from Firewall to fender with a dedicated ground and … Viola! No more voltage overcharging or wild fluctuations I know the purists won’t like but hey … more accessible and not relying on mounting bolts for ground so better function. I took out the Windshield wash bottle which i never...

I set rocker side clearance at .015, most times I have to take a little off the shaft stand retainers to get it perfect. Perfect valve tip alignment with perfect side clearance

I run 8 to 12 on my race cars that never see the street. However on my street / strip cars I run 25 to 30. On my street only stuff, I do not run aluminum rockers. Jesus is Lord!

I’m using these with a SFT with .552” lifts at the valves and installed at 1.725” range.

you have it all apart! why not verify the grind and confirm the install *before* you order a key or timing set you may or may not need? rule number one: never trust a blone with hoop earrings rule number two: trust but verify it's not like it's any more work! or hard work! and it's right...

I think you’re right, that’s what the driver side looks like. Just couldn’t think of the correct part name. Appreciate it!

No, I didn’t expect a 10.00 car to be a daily driver. It’s not cantankerous, don’t foul plugs and doesn’t get hot. I built it just like I’ve built all of my engines. Yes, I did pay someone to port the heads and do the machine work. I guess that makes me a check writer, LOL.

How was it 427 inches with a 4 inch stroke? The 396 and 427 have the same stroke and different bore sizes. The 427 and 454 have the same bore size and different strokes. If it’s a 427 it has a 3.76 stroke.

1000 was the number of conversations which is all that are allower. I removed a couple of hundred so now open!

This is a 340 727 Kickdown Rod. It came off of a 1972 340, but may also work on other years and engines. It goes from the bell crank to the kick down lever. It is original, not a china knockoff, and is about 9 3/4" long. $25.00. Local pickup, or buyer pays shipping.

I'm gona add this, just so you don't get misled as to what's what for degrees. post 176 has more info Cam degreeing help me understand! Me, I'd rather use a t-set with one of these in it.

Probably because it’s hard to bag up or put in a recycle bin…

That's a super cool shot!!! Those mountains are crazy.

Thanks. I just need the trim done and i will paint frame. My gauges are nice enough. Thanks again!

I disagree. The plate has no contact with the carb - there’s a gasket on top of it - so conductive heat from the plate isn’t an issue. And even if the plate gets hot, it can still direct hotter air around the carb. That said, I don’t the think the plate acting as a heat shield will have any...

Is that the code John?

I am using Harland Sharp roller rockers on my 440. The instructions say to have a side clearance per cylinder from between .008 to .012. I recently took my engine apart to deal with other issues and am now reassembling things. I noticed some of the rockers and .047 spacers show interference wear...

The way some lots are graded or by natural laying of the ground sometimes water drainage from one lot to the next can not be avoided. Our first house always got the run off from the neighbors yard and I couldn't do anything about it because it was considered natural ground laying

I bet that. But I think gas was about a buck something a gallon then. Don't see them mentioned often, nor do you see trucks with them for sale often. Not sure if that's good or bad

It has power to tow, about 113,000 mi, plows my driveway and sucks gas

How's it treat you, Pete?

There is one in my pickup