Search results for query: *

I sometimes watch movies with closed captions to see if i can still do two things at once!

14" X 5-1/2" Rallye wheel and trim ring. 4-1/2" BC. $50.00 plus shipping or pick up in north central Indiana.

PM sent.

To me the only way to test it is say DV say a 260° @ 0.050" on a 107 lsa with 75 overlap is the cam for whatever build, someone would need to test it with cams probably at least from 102-112 lsa in 1 degree increments while maintaining the 75 overlap (of whatever it works out to be in the made...

We put pre-made venison burritos on the truck defroster while road hunting. Helps to have a V-10 lol. Heats them up pretty good.

Thanks I have looked I'll just get a different bell housing that other clutch is expensive mine was only $100 at Rock Auto it's the regular clutch a pressure plate not the weird 9.5 clutch and pressure plate

Troy, @CFD244 may have a dash from a Demon, if it's the same.

Yeah, about $1200 for the TTI.

I will take the 67-up. PM coming your way. Thanks.

Functionality is key! I did something similar with our 67 when I swapped to 70 up on our 67 cuda.

Two left.

Yes, that's what I thought. Continuity sound, no continuity no sound.

You pay for the cam and dyno time and I’ll test it. But I’m not taking one cent out of my pocket to do it.

We can agree on one thing Lyin' Brian was his name, but his policies were much more liberal than conservative. As for the rest of this debate, it doesn't belong in this thread.

Tartar Sauce, lime and Del Taco Hot Sauce go real good on fish tacos :D

I had to go back and look. He did say LS7 and I didn’t catch that. Thanks.

Would an Air Brush be sufficient for them hard to get to spots inside the Charger? Near the roof and door posts and such.

Got an email back from the tech at Harland Sharp. He recommends .015-.018 clearance cold that I could achieve by mixing/matching the thin spacers to achieve. I understand 440 Source recommends .015-.030 for a similar rocker.

If the good Lord didn't want you to eat it, he wouldn't have made it look like a taco! :thumbsup: :rofl:

Tuna taco's?

I've seen the signs in the mountains that say you must carry chains or have 4 wheel drive between October and April. My wife's car is front wheel drive, but mine have always been rear wheel drive or 4x4.

I have been making taco meat all morning cleaning out deer burger from the freezer getting ready for this year. I pre make the taco meat and freeze it in serving size zip locks. Saves me all kind of prep time if we want tacos or burritos!

It was smashed and rotted. Sorry

Cleaning out the fridge getting ready for Deer season. I pre make a bunch of taco meat and ziplock it in batch sizes then freeze. I get a hankering for tacos boom pull it out of the freezer and I am done! I also preblend my own taco seasoning to add to the burger. Here is a great tried and true...

I built my car with the same sentiment in mind.

I got to cravin' a French Dip Sandwich last night. :D Google local menus with only 1 good place for it. Of course it's like 9 miles across the valley :BangHead::lol:

Oh and if you want a larger clutch, you can get a set with a scalloped pressure plate that has a 10" clutch disc.

UT Seems to burn anyone that works with him, and never finishes anything. Richard Ehrenberg used to slag him in M.A. I’m a subscriber, just so I can dislike his videos…

I have a set of 2.125" TTI headers on my car. The car I picked them up with cost less than the headers, true story.

MSD digital 6 has a built in timing retard for this reason. The unit retards the timing 20 degrees while cranking. . As soon as it starts and reaches 800 RPM's it advances it 20 degrees. You can also do this with weights and springs if you know what you are doing . Weld up the slots from 1/2...