Search results for query: header wrap

  • Order by relevance
  1. Diy - Magnum Swap!!

    Diy - Magnum Swap!!

    Hello, I'm going to go in depth and detail on how I did my first Magnum Swap into my brother's 1965 Plymouth Valiant 200. The information I will be providing here is intended to help you guys out there thinking about, or are currently, Magnum Swapping your early/later A Body Mopar. Look into...
  3. D

    [SOLD] Like New Hooker headers for small block

    ...of Hooker Competition headers in like new condition. Basically have a few hours runs time and less than 50 lies on them. They also have header wrap on them. They are in excellent shape. No rust. There is one small scrape mark on one of the pipes on the bottom of one headers (purely cosmetic)...
  4. TrailBeast

    Stabilizing headers to the engine?

    ...lifetime guarantee no questions asked, but I still don't want to end up with them leaking. I think I'm going to add a short strut from each of the two lower bellhousing bolts to the collectors and use a hose clamp to hold the header wrap and the strut both. I'll feel a lot better about it...
  5. Divenut

    Heat Protection

    Maybe wrap it with header wrap??? :-k
  6. krazykuda

    check out the exhaust pic.

    Oh, I didn't look at it that close.
  8. Bad Sport

    1974 Duster - First Mopar

    Looks like the set I got. The passenger side is pretty much a drop in, the driver side will have to go in from underneath. You will have to disconnect the centerlink, it goes through the header. You might have to custom ding the driver side in a couple of spots too. I would also recommend...
  9. Meet-Joe-"Dart"

    Is this a fair deal?

    ...I will never buy uncoated again. On my Camaro I had uncoated Hooker Super Comps... wrapped them in about 85$ worth of fiber-glass header wrap, which eventually I tore off as it was a pain to work around and was falling off in big chunks... painted them with about 35$ worth of VHT header...
  10. jos51700

    Woo hoo followed by an immediate Boooooo!

    I've always wondered how they could make a set for big block but not small block... They claim:The only Small Block Header available that does not wrap around the suspension or the frame! I wonder what Doug's will have to say about that. It doesn't appear that the shaft of the z-bar will cause...
  11. G

    Sanderson DD7 Headers or TTI "step"

    I have the TTI step headers with full TTI exhaust on my 68 dart. I also have a mini starter which was a pain to put in. I have minor clearance issues such as #3 header tube is very close to the aluminum head as it swoopes down, #7 tube is also very close to the brake line/frame rail area...I...
  12. Bad Sport

    header-transmission line clearance issue.

    Buy some of the 1200* heat shield. It comes in a package, I got mine at NAPA. Wrap the line with it, you can cut it to fit. Second option, NAPA also sells a high heat repair type tubing, it's a little pricey but it works well (some sort of silicon). My starter lead was very close to my...
  14. 7

    Header wrap on aluminum fuel lines

    ...live more than a minute or two being that close. I either need to insulate the exhaust or the fuel lines. I have a 2" x 100' roll of header wrap that I was planning on using on the headers and part of the exhaust, until I started reading horror stories about it destroying the steel pipes by...
  15. dusted72

    check out the exhaust pic.

    That's not flex pipe. The pipes are wrapped with header wrap.
  16. B

    Installing Headers

    the next one i buy will be a mini, but for now, its doing good. one of the benefits of having a big hole in the hood with a scoop lol. i really should crawl my lazy butt under there and wrap the header hehe
  17. P

    HOT running mopar 360LA

    I gave up on the header wrap after messing with it for 2 hours and not getting anywhere. I run block huger style headers so they are a pain to wrap, if its even possible to make them work good. Instead I just got the plasma cuter out and cut a lot of the inner fender out. I noticed an...
  18. O

    Watching grassroots drag racing....

    Hey Tim.:hello2: I know where your coming from here. Man, back in the late 70's/Early 80's, i used to attend a lot of the off night races when i lived in Maryland. 75/80, Capitol, Budds creek (MIR), Manassas, Va, etc. Mostly on reconnaissance missions checking out the competition......lol. I...
  20. Oldschoolcuda

    [SOLD] Nice cheap misc. will never use stuff

    ...shipped. Thanks for interest. Oldschoolcuda orange ignition box voltage regulator Misc. Body plugs Eddy chrome fuel outlet Eddy mopar linkage adapter Flame valve cover caps 2 radiator caps Oil pressure & water temp sending units Design engineering header wrap & spark plug sleeves Red vacuum...
  21. G

    [FOR SALE] 440 headers and exhaust

    ...4 inch flowmaster mufflers, system held together by band clamps and welds also has o2 bungs welded into collectors one in each. There is header wrap on most of the headers which dramatically cut down on under hood temperatures some of it may need replaced, there is also heat shields on a few...
  22. 1967 'cuda

    67 cuda FB progress UPDATE

    Oh. - I didn't realize it was so simple. LOL. It sounds like it would be easier for me to give birth to kittens than build my own headers. I'd really love to see you guys post detailed pictures of these header builds. Maybe some day I will attempt to build a set but I keep picturing the...
  23. G

    [FOR SALE] 440 headers and exhaust

    ...4 inch flowmaster mufflers, system held together by band clamps and welds also has o2 bungs welded into collectors one in each. There is header wrap on most of the headers which dramatically cut down on under hood temperatures some of it may need replaced, there is also heat shields on a few...
  24. M

    LSx Valiant Build. Take a look inside...

    I'm certainly no engineer/performance builder, but i wonder if you could do log manifolds in an N/A format? You may loose a little power, but it would get it on the road(providing they fit)
Back
Top