Search results for query: *

That's interesting. Must be a difference in the Canadian parts as the hoses I used from Nappa are made by Dorman, an OEM manufacturer and are perfect. Very little modification to get them installed and way more robust than the factory hoses. When they are stretched out it is very hard to...

I recently purchased a 67 Baracudda formula s 2 door fast back. My reverse lights don’t work ,I,ve scanned some posts but is the bulb serviceable? I removed the light assembly but woory I’ll Crack the lenses if I try and separate? Appreciate your input

I’ll never buy another set. I’ve found issues with mine which I’ve posted about, I Dont like the intake and would buy a super Victor or Victor340. With that said the TrickFlow head is a great head for those that want a 6.60 ET capible head or 10.50’s in the 1/4 with the right parts.

That is a very nice Dart! I have a 66 GT as well except mine was totally disassembled when I bought it. I'm hoping to have it look as nice as yours, one day :)

I would think it would be a zoning code, not a fire code. What do they do when there is a fire in the open woods? My experience is a little different. Zoning sited me for not having a dumpster encloser, so I submitted plans for one. Problem was they also wanted a "hard" surface, plants along the...

Street car guys, 500 horsepower guys, simplicity guys, get a damn grip.

That's impressive. Did somebody in california do the heads?

The right altititude and tires does the trick.

I got an iPhone 6, is that phone too old?

They're all repops so I don't know for sure. The trunk lock is correct. They are recessed like that.

Lots of beautiful Mopar’s out here today!

So is the one I linked in the first message a good alternative?

This was the inexpensive, low quality hose that I just discarded. Thanks for posting, but I'd recommend against using this product.

Could very well be a bad repop.

I'll take them. Send me a message with how you want to be paid.

Scam

You did this from an iPhone? All that comes up in share is airdrop, messages, mail and news.

2" over stock rear sprngs from Espo

factory 65~72 for small bolt pattern or 73~76 for big bolt pattern will give you front disc, rear drums. there are also some aftermarket front kits that will fit a 14" if you're looking for rear discs that will fit with a 14" rim, i'm not sure such a beast exists.

What can I do to make my car have this stance without going to air shocks?

Correct diameter hose is also available from Nappa. https://www.napacanada.com/en/p/UNR23840?srsltid=AfmBOorZkf0XXUXjYsMxdGoStWqrbZHun18_i88sihgDMk0bBmyNiEMy Here's the Nappa Part Numbers for my American friends.. https://www.napaonline.com/en/p/NOE96004...

What was

certainly appreciated, I don't remember any instructions with the struts but I think the proprietor was very approachable. Kinda wish they still did individual suspension parts. Im kinda partial to the old Mopar front end and spring config. Additionally, YouTube is full of folks doing front...

I have a 72 Dart 318 with 4 wheel manual drum brakes on 14" wheels. I want to convert to disk brakes. I would like to replace front and back and add vacuum booster. Everything I've found says I have to convert to 15" wheels. Is there a disk brake replacement for 14" wheels anywhere out there?

Welcome from West Virginia……….. :thumbsup:

I suspect Dana's point was that there should be no voltage drop with the key on or off unless something besides the ignition and field are drawing power. Voltage drop only occurs when current meets resistance. Key on with a normal ignition and field should draw no more than 5 amps. The...

Shipping would be about $20

They are offshore sourced like all after market rods these days. The bearing bore and pin bore measured good. They weigh 705 grams. I ran about 30 1/8 mile passed on them. They were just a bit too heavy to balance my crank without using Mallory metal.

Yup. Some days suck harder than others but you can't quit. I can't quit anyway. If I just sit around I'll lose my mind (what's left of it) and my body will lock up. I'd rather be dead than live like that.