Search results for query: *

Morning 600 + HP all day these late 904 never had any issues like there big brother the 727 did core charge is $85 thanks for looking

Sidewalks and deck are cleared manually with a shovel. Garage apron is cleared via either one of two Toro 2-stage snowblowers, depending on depth and weight (water content) of the snow. We either use the light "flapper": Or the more "serious" Commercial (no shear pins) unit (typical pics...

Moose hunting with a Daytona

I don’t even run that spring on the exhaust valves.

New thicker head gaskets, careful use of sealant on intake and no leaks! Used the 9898pt gaskets

The only 270 badge that remains, is on the outside of the passenger hood scoop. I did see a Canadian restoration, and some sales literature when the car was being sold. There are a few emblems missing.

I can’t remember if your carbs are inline or sideways. If they are inline you may have enough fuel in the bowls that Turing one way will lift the float and shut off the fuel. But it would have to be an aggressive long turn for that. The other thing I’ve seen is too much fuel in the bowl and...

That's sad to hear.

Carlisle Mobility Scooter :steering: :lol:

Goop bye, time for some trim , oops, a trim :rofl:

Next time take a chance, save your Nickle and sh*t your pants. :rofl:

We do like two rows then squat in Matt and Billie's spots usually.

Tranquil- It's a slant six cable, but I think s/b is the same. No extension on the mini starter

All right, I’m not getting into this but how do you know he’s running around the house naked? If he’s doing that I can promise you his wife would be sending out here to live with us. And yes, I just asked the wife and she says Rob can live here any time he wants. He just has to have his...

I believe you should also have "270" badges shaped like guitar picks for the front fenders.

You should have an "AutoMex" plate welded to the ....a few years ago I could have told you where. Either the shock tower, or where the US fender tag would be? They are NOT similar to any US car VIN tag or data plate.

It wasn’t too bad. Just have to make sure you don’t max out the clutch tamer. My pedal had somewhere of 5” stroke and the tamer has 3” I drilled and tapped the pedal for two 10/32 machine screws. Used the bolt hole from the parking brake bracket. I think it came out to a 2” offset from that bolt...

That Power Wagon looks like it has some ten round stripper clips hanging there. Kind of surprises me being Canada has a five round limit in their guns. Cool car shows you get to go to Mark. I bet you make lots of friends there. My area the shows are far and few between.

Thought I had found some vintage Cragars for a project I have in mind on CL. Asked seller some simple yet important ??s and got an uneducated response. I think I'll keep looking.

Bump

Hi, would you ship the kit to Ontario, Canada? How much?

It’s a molded 1 piece carpet no tagging, well i guess I’ll never know. May just keep it for prosperity. Already ordered the 2 piece carpet. But there was 2 holes cut out under seats and 2 more small holes towards rear seat pan maybe carpet came from another vehicle.

<~~~~ got the straight Jose's Columbian in the espresso machine today. Nice change. :D

Good morning to all the Superb Smooth Saturday Coffee drinkers this morning, and the non drinkers .

I am looking for some nice,clean '72 A Body 340 Exhaust Manifolds. Casting #3418623 and #3614368. Need late 12 (Dec)/71 or early 01/02 (Jan/Feb)-72 date codes. Must have heater riser or at least not welded up holes and minimal rust pitting. Top $$ paid for the right stuff. Thanks again FABO

Here is what you aren’t getting. Since we are talking about are under the curve, you are talking about WOT. What I’m saying is the numbers you see at WOT do not translate to part throttle mid load power. You (and most others) assume or suppose is a better way to say it is that what you see at...

Stable looks very happy cousin, looking forward to seeing it in person, little sage burn 5his morning for everyone and my safe 45 mile drive home in Victoria

Terrible situation... so glad we are not dealing with any of that... Haven't watched the weather much, so not sure where ours came from, but even up here it's near a week since we had a truly dry day. And not expecting full sun till Thursday. I guess we're getting all of the rain we missed...

It's Seedandelivry Saturday! Good morning :D

Ok, not pitting