Search results for query: *

I can tell you this: engine idling; if turn the dist CCW [ to advance the timing ] to about 28-30*, the engine will: - idle faster [ making more hp ] - idle smoother - make more vacuum - run cooler. I would do this, re-adjust carb, see if it helps the stalling problem. Backfiring could be many...

TOTALLY what he said. You will regret sanding with 400 and then applying filler. 400 will not give the 'tooth' required to give the filler something to really stick to.

You can run without PCV. But these carbs are designed to pull about 3 cfm of the ~20cfm of idle air from the PCV. Without PCV, the air has to come from somewhere else...such as small holes in the t/plates. I no nothing about Progression Ign Dist......but if it does not allow you give the ign...

Raise the front wheels off the ground, loosen the two bolts that hold the valve block to the top of the steering box... They should be snug but not tight... Start the car.. Tap the valve block with a small hammer, forward or rearward... As soon as it moves you'll see the effect & you'll know...

No

That's a great idea. What was your address again? :rofl: :rofl: :rofl:

If you still use an ignition system with a ballast, there is no/ very little current there anyhow, as the "run" wire goes dead during cranking. One thing you for sure want to do, is check for voltage drop, as that run circuit is very prone, and affects charging voltage. Turn the...

That makes no sense at all. Just because your drum brakes work "fine", that doesn't mean the car could not benefit by the addition of disk brakes. Everybody knows that disk brakes work better, will stop your car in a shorter distance, will not fade with heat as bad as drums, and are, therefore...

Is the Progression Ignition distributor easy and intuitive to use? I've been curious about these.

I would say steering gear

Power 4 wheel discs on my Barracuda. 73 Dart donors on front and Jeep Cherokee on the back . Stops great ! Manual 4 wheel drums on my Swinger . I used a smaller diameter master cyl and larger wheel cylinders. Stops great !

why do you need 400hp, 235 works fine.