Search results for query: *

Every medium has bad actors. There is a few on here I’m not too happy with, but I’m only buying and selling on here cause the majority of guys on here are good eggs. The problem on Facebook is it’s so large and popular that the same percentage of bad actor is overwhelming.

Thats a good deal right there.

Fuckfacebook. Consider yourself fortunate that you don’t have to waste another minute on it.

That is one fast ratty assed hooptie and I like it.

I have 17 hung in my dad’s 2800 sq ft shop. Even though it’s daylight outside, they still throw alot of light. The one circled is the one that 1/2 half went dead after 5 years. Big deal, at $19 a pop, compare that to the cost of a cold weather 8ft florescent light and they are instant bright...

Actually 360 cast cranks are real stout. If your buying an aftermarket stroker crank, you might as well get one with a good reputation.

Insulation blanket is paper backed, thick paper as well. Anyways its all behind inside walls and ceiling and there is vapor barrier covering it all.

There are so many better quality cranks on the market today even if they cost more. I’ve heard to many eagles have snapped.

I got these from Amazon and have had really good luck with them. Way cheaper than florescent and I only had 1/2 of one go bad in 5 years. I replaced 50 florescent fixtures which I tossed out cause no one wants them. Big improvement, brighter and cheaper than buying bulbs and ballasts.

You can buy insulation in a big blanket that goes around the roof trusses right on the underside of the roof and down the walls. It insulates better cause there are no 2x4’s to transfer cold to the inside wall. On mine I ran siding faced plywood up 4 feet on the inside walls and the rest metal...

Not a big fan of Eagle anything.

Them stainless which are bushed are the way to go. They have a high fatigue life.

I got bad knees, need knee surgery among other issues. I can’t run, but I can walk and do yard work and construction. A guy I used to work with wore out one knee joint playing baseball. He could turn his lower leg at the joint so his foot was 90 degrees to the joint. After he showed me that, I...

Considering the tall deck height and piston pin height of a stock 340/360, a stroked engine with the lighter pistons and properly lightened rotating assembly(rods and crank) will rpm pretty much the same.

As parts parts supply’s dry up for these dated assemblies and builds, I believe it would be best to converse with folks that build engines as a business and inquire about their parts suppliers.

It’s an iPhone 6, not a google or android phone. It doesn’t have cut, copy or paste. It has share, but no link to FABO.

I got an iPhone 6, is that phone too old?

You did this from an iPhone? All that comes up in share is airdrop, messages, mail and news.

Someone is always worse off than you and me, so I’ve decided to stop whining, push as hard as I can and empathize with those truly worse off than me.

How do you upload a video from YouTube onto a forum from an iPhone?

What a boat.

Doctors told me “they don’t know what causes them”. They showed it to me and I said “no way that thing came out of my dick” but I was pretty messed up on the drugs they gave me.

From my experience, the first one is a killer. The second and third are not quite as painful and once it was confirmed that is what it was, I was like, meh I’ll get through this. But then again it was like 25 years between first and second, so I totally wasn’t expecting the second. The first...

Just because his car and most cars of that era are shaped like a brick doesn’t mean it can’t be made worse and that scoop will. It’s kind of like rubbing salt in a wound after you already rubbed dirt in it, just my opinion. And that’s what he is looking for, opinions.

I’d turn it around opening facing the windshield as far back as I could. Use a 14” K&N air filter 4” tall with a X stream top and cut the hole in the hood so it sticks through.

That’s where all the good air is, right at the front of the hood.

Just buy some honing oil, your parts store should have some. I don’t like using penetrating oils, fumes.

With all the new Edelbrock carbs on the market, looks like they are moving away from the original AFB.

I have interest.

Please post a picture of the head casting numbers.