Search results for query: *

That pretty much looks like it, minus the choke horn. They did a decent job of blending the edges of the cut. Maybe I'll go take a look. From what I've read the 3310 is a pretty decent carb. May not be able to use it right away but not a bad thing to have on the shelf if I can get it bought...

I can’t provide insight to the problem but I gotta commend you on posting clear photos in a tight spot; well done!

Correct.. but the topic was how could this be 66 318 LA

Seems to me you and I are working on the exact same car different color.

Lots of Subaru enthusiasts back in CO, not the wisest bunch and were often the brunt of jokes from fans of other makes lol. One of my peeves how fans of advanced tech think they are somehow better and smarter because they drive/use stuff that is more complex, expensive, exotic etc. OK...

I did not know this; thanks for the lesson.

Thats just way to cool, I agree that shipping to your home and packaging it top notch, congratulations Mike

keilbosy. Smoked sausage could be substituted.

Assembly is now Pending. Thank you for all the inquiries.

This time I played lazy guy and bought a gallons of sliced potatoes. (Small round ones work great two) slice up 2-2.5 pounds kelby, two medium white onion. Two together in a cover oven pan or aluminum throw away pan. Sprinkle generously with garlic salt and cut up one stick of good butter. On a...

Brings back some great memories around Black river when I was between the ages of 8 to 18. I seen both of my king snakes when we got hit by that hurricane rains, they will be on the prowel around my buildings if there are any new burns out yet, cat turned a year old last July and it was...

We've been colder in the morning. No furnace yet. Just got a new one with new central air in July, haven't had the new furnace on yet. What is "Kelby"?

Hang on, here's another option; if the pushrod, coming from the master cylinder is adjusted too long; the compensating-Port will not work, and so, as the friction pads/shoes wear, the pedal will naturally sink ever lower, as more and more fluid from the power chamber, moves towards the slave...

The cable end is square, but it's like twisted. I'm not sure if that's how its designed or if it's damaged. The cable isn't broken as I can pull it all the way through the sheathing from the transmission and that end is square metal. Cable looks good to me.

I’ve seen gear drives get trashed from lack of oil. Timing chain wear is mostly from not getting enough oil on the timing set. And this is on not just Chrysler stuff. GM and Ford have the issue too. There is a big difference between a production car driven by the general public and a race...

It very well could be as poster #2 says But I'm gonna tell you a story of what happened to me. I'm going with a bad pattern on the coast side of the R&P. Sometimes that's just the way it is. My 3.55s have been doing it for all of 25 years. It's not really a bad pattern; I've adjusted it...

It has been so long since I had an early A that I don't remember if the speedometer end is square or if it has a nub on one side of the cable. Is your cable end square? Can you see anything inside where the cable goes (almost looks like a slot on one side in your pic)? If the car is running...

For street driving all that's needed is a quality rebuild and shift kit.

Thanks, Al. Very interesting.

If your short of 400 hp doubt it will be by much, if you look a the basic 318 400 hp recipe it's 10:1, airgap, magnum heads or something on par and a 230° ish cam, your short on cr but are porting the heads.

Sone have c-10 some have c-12 on them

There is a special "shoulder" bolt that goes thru the pedal and pushrod. Often the wrong bolt, or a washer was added, or just gunk gets on that bolt, and it binds on the return. Try loosening the nut/bolt thru the pedal. If that eases the problem, find out why it's bindin and repair it. Don't...

And the damage probably didn't stop inside the cover. As already mentioned, better check the valves and pistons.

Flashback Friday

There's this spring but i'm not sure it's supposed to return the pedal all the way. I have a 67 b body that has that spring on it. https://www.forcbodiesonly.com/mopar-forum/threads/brake-pedal-return-spring-and-seat.13954/

Where did the cam bolt and cupped washer go? Did it back out ? Any evidence of that on the inside of the timing covers. My guess is the cam bolt backed out. Then bad things happened !

Flashback Friday

You're right, it definitely is being pretty hopeful. I don't think it'll get there if I'm being completely honest with myself & you. Since this engine was nicknamed "Weird Science" for all of the random old school stuff I did to it i have always said I'd honestly be happy with anything from 325...