Search results for query: 66 barracuda

Nope- not 66 barracuda factory lights. Maybe your car has those but not the 16 I’ve taken apart. Lol! I’m thinking C body

Yes, the 273 was in a '66 Barracuda. It wasn't fast, but by comparison to other sub-300 cubic inch performance engines it more than held its own. The handling package and disc brakes also helped the fun factor. 340 is in a '68 GTS convertible, 440 is in my son's '67 Dart GT convertible. In some...

Welcome to FABO from another 66 Barracuda owner!! Post up some pics when you can!!

Ok, to be a genuine Formula S in 1966, it HAS to have the fender tag with F7, and the Shipping Order number on the fender tag has to match the one stamped into the radiator core support. Everything else could be bolted on to mimic a FS.

...have a 7.25 rear end in the '64, nothing else was available until late '65-'66 when the 8.75 was introduced. Use a driveshaft out of a '66 Barracuda/Valiant to connect to your new trans. Use a '66-'67 speedometer cable to hook that up. You'll have to wire in the later trans. backup/NSS to...

Nice original piece, chrome is great and black is very decent also. One only, $30 plus the ride.

Out of a dealership data book for 1966. Information from The Hamtramck site. https://www.hamtramck-historical.com/images/dealerships/DealershipDataBook/1966/66_Barracuda_0008.jpg

may have to go that route. thanks

Fits 63 64 65 66 Dart Valiant Barracuda A-Body Sill Plates | eBay This ebay ad is just an example but if you get the raw pieces they cut easily with a fine tooth ban saw. give the cut edge a light polish and mark your mounting holes and drill and you will have nice pieces.

$35 including postage in US Offers may work too. Located in Waterford Michigan. Please send me a message as I may miss a post here.

My 67 Barracuda with the Commando 273 had the 26 spline output shaft A-833 also.

I was hoping they were 63-66. I was gonna jump all over um. lol

Jeff, if it was a deal across state lines that's federal. Most law enforcement agencies these days also have an Internet Fraud Division that will help. I had to enlist them when a member turned into a stalker and they jumped right on it.

I agree with @barbee6043. You have a very easy patch section to do, if you know how to weld. A good patch will require a good butt weld. Watch a couple of episodes of Fitzee’s Fabrication on YouTube to see how he butt welds. You have to go back a couple of years to see some of the good ones...

before I was a member here I was looking at a nice 66 Barracuda that I later found out was owned by a member on this site. I had the guy send me a copy of his driver's license and the title before i would do payment. The name on the title did not match the drivers license and the drivers license...

Lots of great people on this site. Glad you met a few of them sounds like it made the ride for you!

No big C body to sneak into the A body section this year?

...two of our fellow FABO brothers. After heading out from the west side of North Dakota to Sioux Falls, where I scored a decent pair of 66 Barracuda seats from a local musician, then to Des Moines where I met FABO member @lkopaska, who was kind enough to not only share his story with me but a...

Sounds like a nice trip, thanks for sharing/pics!

...FS cars with a 4 speed and a 7 1/4 SG rear. All my manuals only list a 7 1/4 rear axle housing and axle shaft for a '65 model. My early '66 Barracuda ( 8/17/65 build date) came with what I believe is a factory 8 3/4. It didn't have a window sticker or build sheet when I bought the car in...

Hi Moosestang, Ok, I could write a book on this subject. But You've got someone on the group to look at it. I would also call the local chamber of commerce and find out the oldest car repair shops in the area. Pay them to look at the car and eval what is needed to make it perfect. Then if...

These sill plates are for on top of the rocker panel. They are visible when you open the door. The carpet hold downs are inside the vehicle

Anyone try the QA1 sway bar? At some point I'll be adding a sway bar to my 66 barracuda. 1966 PLYMOUTH BARRACUDA QA1 52861 QA1 Sway Bars | Summit Racing

Sounds like you scored some good parts and made some good friends. Glad to help. Hope to meet you at Mopars in the Park next spring.

My 66 Barracuda will do that. I know about how much my tank will need (by tracking miles on the trip meter) so as it gets close I "try" to listen for the gas as it gets near. Also, around here the non-ethanol pump handles are variable speed that allow you to slow down the flow. They are great...

What is not right?

I recently got my 416 build on the road, 66 Barracuda. Forged Eagle kit, h-beam rods, Mahle -5 pistons. CNC Hyd Roller speed master heads Airgap Dual plane, Holley Super Sniper Comp XE Hyd Roller cam, 280/288 .541” lift, 110 LSA Mine is an automatic with 3.73 rear gears, 3000 stall. Makes...

...17” 6 blade steel fan. Cooling much better. In town driving, close to 200. Highway 180-190. No overflow issue. Still looking for a 66 Barracuda shroud. Measurements of an aftermarket shroud won’t work.. maybe pre-fab in my future… Electrical Drain *found a faulty brake switch. Replaced no...

...in the corner areas, there is no plastic cover for that center area other than the plastic caps I describe. The caps are solid with no screens. That center area on mine is painted interior color. As a side note, I also have two '66 Barracudas that show that area being the exact same as my '65.

Hey Brian, Great to see your car here. I'm surprised I didn't see it sooner. Congratulations on the outstanding build!!! It's definitely an inspiration seeing it on the road and track! :thumbsup: I love the Hemi stripe on your Duster so much, I considered trying to put the same one on the...