Search results for query: *

The casting date of a part can be from the calendar year BEFORE the actual model year. It shouldn't be so hard for people to understand. Cars and parts are not "born". They are cast, forged, molded and assembled. This engine block was cast early enough to be for a legitimate early 1967 year...

I wasn't even after bump steer concerns as I worked to get my tie rod lengths close to equal. I was trying to prevent one wheel from turning in more than the other as the car lifts on the hit. Between getting them close and adding 3.5 deg of caster with the SPC double adjustable UCA's (using...

Can't find the post I was talking to someone about the mirror on a 65 Cuda. On my car it still has the original mirror and it's a twin post. Hope this helps.

Very clean car!

...at at very little throttle but everywhere else is pretty close. It comes on immediately with the mash of the pedal with no hesitation and pulls hard past 6k. Currently 20* initial, 34* total. Idles at 950rpm with 9 inches of vacuum on 93 pump gas. Give me your opinions on these plugs...

All is well - we had no real issues unlike so many that got wiped out. I knew you'd like you a black 72 Demon!!

Could you please measure it and post it. Thanks.

Seems two years later and you still can't find intake gaskets for a 273.

I can sure see why! Gainesville's issue seems to be 2-fold: 1. No leadership: The track is ok but NO maintenance evident as the restrooms are poor, probably about 1 in 3 loudspeaker works making it near impossible to know when to go to staging. I've been there when literally NOTHING was...

The Carter BBS and BBD were progressions of a single-throat carburetor made by a company named Ball & Ball. When Carter developed those two carburetors, they were named for their heritage: BBS = Ball & Ball, Single venturi BBD = Ball & Ball, Dual venturi If you're ever interrogated by the CIA...

nice car but PLEASE repaint those centers!

I measured the height of the tube & on (on side of the pumpkin) 3 measurements along that length were equal but on the other side the measurement at the outer end (near the perch) was 1/8" off and I pullled both axles & one went back in easily but the other one needed some tapping. is it time to...

No. Passed on that one It was lower mileage but had the 460 in it

Yes. 7.3 281,000 on it

well, looks like he filled it!

7.3 power stroke? Legendary engine...

1 pair 70' Dodge Dart & 72' Plymouth Scamp excellent condition tail light assemblies with pig tails and mounting screws. Found in junkyard over 20 yrs ago. $150.00 for the pair + shipping to the lower 48 states. Most likely will fit in a large USPS flat rate box. Check or Money Order only no...

They won't set off the metal detector like a stylish metal hip flask would :lol:

A centurion?

As one that looked forward to new car reveals, it was more in September than August that new car models came out.

Welcome aboard Drop some photos here when you get a chance.

...As the air temp gets colder your carb will run ever leaner, until it starts to complain by misfiring. AND There is a good chance that right around 0*C to maybe plus 3>5, with high humidity, your carb will go into a condition called "icing"; in the which real ice forms on the edge of the...

Here I sit in bone dry central Texas (multi year drought), and I find it totally disheartening what everyone in the path of Helene is going through. My hometown was about 1/2 wiped out by a 500 yr flood in ‘78. Property can be replaced, but the human losses are forever. Everyone prays for...

I read the article this morning on nhra.com. Several times the article said it's a "multiyear" agreement, but it never said how many years. I thought that was kinda strange.

Pictures, love to see her.

Still the same one as in Post #1? Then I'm in.

Dorman has several offerings as well. I'm not sure why they didn't appear in the RockAuto search, but Rock carries some of them.

Every review is either one star or five stars.... easy to read between the lines there.