Search results for query: *

TMM https://sacramento.craigslist.org/ctd/d/finley-1964-plymouth-fury-max-wedge/7790313839.html

Thanks for the info. I would love to find that dead nuts match, but they don't seem to be available. I'll just chill till I actually need them and see if I can get lucky. My engine isn't even out of the car yet. Just parts shopping.

There are two studded clips. For Barracuda, these clips are staggered not in a line as in a Dart. You will need two nuts with captured washers, needing a 7/16 socket. There is also a lower "L" shaped bracket to support the back of the radio. It needs a phillips screw to attach it to the lower...

Oh yeah, in addition, after I got it off, The impeller is stuck

How many of you all have seen an electric water pump on a 2018 Toyota Camry? Had a strange code in the ECM when I scanned it. When I investigated it it said water pump issue. I checked around and Toyota and other vendors wanted over $300 for the pump including the manifold that bolts to the...

Yep, wrong year for me too but still willing to sell. Passenger side number matches. Drivers side no. Heat riser works great. PM me if you get desperate. :thumbsup:

I would require adult supervision for such things. Odds are I would completely brick the truck if I started futzing with The Matrix :lol:

McDowell for pole Busch/ Bowman for Race

And if you tune it you need a EGT gauge. Easy to install...

Oh yeah. We have the largest ACE in like 7 southeast states. No square head battery bolts. OReilly has um of course, but I wanted stainless or brass.....which is a no with them. Kegan found me some titanium. Pricey, but hell yeah. lol

The one i used was Diablo 2. Don't know difference except price

This is close enough for me.

LOL I have to tell you guys everything?. Actually sometimes I static time with the ignition ON. I get the dist retarded, points closed, and "rig" a gap or neon lamp to the coil wire, then move the dist until I get a spark. With practice, you can do the same thing with...

Haven’t tested it yet but have a suspicion about the ignition switch. Thanks

Rusty, even Ace hardware has SOME brass and stainless hardware. You don't have a local fastener's store? I would not expect Lowes/ HD to have much, but surely they have some stainless

Thanks for checking.

for the most part, yes. however, special attention should be paid to the intake and exhaust ports-- 273 & early 318 are smaller and a mismatch can result in a poor seal or intake leak.

And just how much power is being drawn? You should be able to not modify the factory wiring, and disconnect the original coil + wire, connect that wire ONLY to the small red Also be absolutely CERTAIN you have NOTHING connected to the coil EXCEPT the two wires from the MSD. If...

the 1213's are close, but not a dead nuts match. reasonable closeness for my application: 68 318 2bbl heads and an LD4B great quality gaskets though.

Thank u

Absolutely, and if you do, remember to have the intake surface milled as well. The machine shop should know the formula.

Print-O-Seal.. Very good gaskets. I needed thin and had some steel shim gaskets. (heads milled and intake surfaced after the fact)

My old house had no roof ventilation. You could see the moisture running out from under the metal roof. Got rid of that house right quickly.

hey al if you bring to garlets let me know i am finaly putting my duster together need a piggy gears are to low for me but would like to see it.

Those show a 2 barrel port. These are coming up as good for an LA small block, and half as thick. Curious what others have used in their builds. https://www.summitracing.com/parts/fel-1213s3

The greater part of fixing anything is taking it apart, cleaning it, and putting it back together. If you're still working on the hood adjustment, a new set of bumpers might be worth buying.

I've seen condensation on unfinished buildings to the point it looked like rainfall. If the metal is galvanized, it will ruin an automobile paint job.

I checked for you, and found I have 2 sets, but dates are Dec 1970, and July 1972, good luck.

my guess would be because the small red wire is getting power when the key is off