Search results for query: *

Bic Atlantis-they write nice, don't leak and last a long time!

Evening. Surgery tomorrow. Yay :BangHead:

Ever have one of those day's when life just sucks...

This is from a different thread as you can tell. DC k frame Thread starterkick Start dateNov 30, 202

PM sent. I will take it if you will ship it to Michigan. Thanks Jim

Yes, and then some. I started a while back by cutting the tube that extended out the K flush and still ran a spacer. I mostly did this to bring the wheel center while running almost 7 degrees of caster. I just took the spacer out and put a thin machine washer next to the bushing.

I absolutely love "tool" pens. What are popular ones out there. I used to get them at office depot but my local location closed permanently, so now it's amazon only.

Post pics. I am less an expert on the '67-69 K-members than I am on Direct Connection K-members, but without pics we're just guessing.

^^^^^^ And/or the pull off is not functioning or misadjusted.

How did you go about moving the LCA’s forward? Thinner spacer on the front and thicker on the back? My tires are a little farther back than I’d like as well.

It’s just a python lol

Can you guys help me out .. Looking for factory fitment Pictures of the trunk On the Duster - Dart on 73-76 . Cuz mine don't fit worth a crap

Can you explain this? I'm not sure what you mean.

Sounds like the choke is staying closed too much once started.

I'll double check when I get home but I believe they are 215 70 14. Tiger Paw were the only white wall I could find. Saving up for more Coopers !!!!

I’ve done a couple installed a t about horizontal. I have it plugged into my Innovate LM1 for tuning the carb. It’s a temp setup with the cable running out the window. It’s a great tool.

I seriously doubt it( super Victor) would be worth anything on a stock stroke 340. If anything, wouldn’t surprise me if it was slower than a Victor.

Vegas Picks Top Fuel..Antron Brown Funny Car...Austin Prock Pro Stock...Dallas Glenn PSM...Gaige Herrera

The rest of the body except the hood and trunk lid is done!

Is there anybody else out there that makes oil pumps besides Melling?

I have this one out of a 73 Dart Sport. At the Galits Show this weekend. $50 if it doesn't sell at the show .

Hello, So I inherited a 70 charger that I have been having some issues with and have posted about this car a couple times here on the forum. It is a 440 HP out of a 68 New yorker, with the 727 auto and an 8 ¾ rear end. I know the engine was bored, block decked, heads shaved, running XE274H-10...

Start using the search button and you'll see that there is tons of information available Thread starterJ.B. Start dateJan 14, 2024 What is this metal hump next to 4 speed hole?

1 set sold. thanks FABO.

I mean non sensor safe silicone ANYWHERE on the engine. It will kill the sensors lickety split. If there is non sensor safe silicone anywhere on the engine it will kill the sensors.

I'll have a few dash pads there ! Hey Chris , I'm in spot #2 Just in side the gate in the shade. With other A body guys !

Tires arrived and I had them mounted up. This is my old 235/40 compared to the new 265/35 for the front. I'll get some more photos outside once I get my alignment done. I moved the LCA forward more to get the tire away from the rear side of the fender. The front wheels are 1/8" further out...

Yes it has and could be 3 feet of snow by now.

Well, theres some of that going on too. I have an 11 year old daughter that likes to hunt too!!’

340 with basic mods https://www.motortrend.com/articles/mopp-0102-1970-340-high-performance-mill-dyno/ Phase 1:Stock 340 baseline, Chrysler electronic ignitionPhase 2:Replace small production AVS with Edelbrock 800 CFM carbPhase 3:Replace factory HP manifolds with Hooker 151/48-inch...