Search results for query: *

Has anyone tried to fit the Trick flow 240 with the track heat Intake B engine under the hood on a 70-72 dart

I would appreciate that

I have a 70 dart with a new big block stroker motor i need to get dialed in ,i want to put a new Carb and valley tray also.

Looking for a good 65 dart horn button

i figured it out thanks for all the help greatly appreciated

How do you get the 7 wires from the new wiring harness down through the steering column I taped them together they are too bulky to fit through can anybody help figure out how to get the harness down and I used a wire to pull old harness up through I had to cut ends first I then attached wire...

The Original 8 The receiver has 5 receiver ports on top and 5 bottom 10 total

So would I just plug into one of the open recepticles does it matter

I just purchased a new signal switch and wiring harness The New one is the first picture it has 7 wires the old harness has 8 wires , some are different colors need help don't want to take it apart more than once

there was no way to access the nuts because of the air conditioning unit ,I broke off the studs very easy saved a ton of time

thats what i did it worked great and saved a bunch of time greatly appreciated

I got it ,i took a gasket scraper and broke it up ,the screwed thread for the thin nut is plastic that is molded into the vent so when you brake the plastic you can brake off the threaded stud you push on the broken with a screw driver stud it falls inside on the floor.

A 4-in crescent will not fit in there it's tight I think maybe starting to snap off the top might be an idea

Do you know what size the nut is ?

I am trying to replace plastic defrost vent and tubes ,there are 3 flat nuts on the under side I cannot get a ratchet on them any ideas would be appreciated 65 dart w/air

it is not the vinyl its the rope like the front

do you know if these would fit a 65 dart im in florida also

I am looking for the rear quarter window windlace in lipstick red any help would be gratefully appreciated

Heat riser on exhaust manifold

Heat riser on Exhaust manifold sorry

I need a good heat riser for a 65 dart with 273 2 barrel Stromberg WW carb

I was wondering if there is an alternative carb maybe a newer one that would bolt on and have the same linkage or do I need to find a good rebuilt WW 65 dart 273 Auto

I actually found and bought this exact fan still in original box fits perfect

I wouldnt have a clue but it does have one on it now i am just replacing what is on it now is there another option ?

Can't find a good clutch fan for my 65 Dart w/273. The original part number is 2536675. This has the smaller 5 1/2" diameter body, not the 7 1/4" most after market units have. If anyone has a good used one sitting around , I'd appreciate a pm and price. Thanks

I need the outer passenger side outer tail light in good shape for a 65 dart

is there a way to tell size ?

I just purchased a pair from a member here ,i didnt know there was different sizes it wasnt the actual hanger it was the front spring perch if they arent the right ones maybe you could help me out